Philips HTS2500/05 Operation & User’s Manual

12 Check software version 12 Update software from a CD-R or USB 12 8 Product specifications 12 9 Troubleshooting 14 10 Index 15 Contents 1 Notice 2 Copyright 2 Compliance 2 Mains fuse (UK only) 2 Trademarks 2 2 Important 3 Safety 3 Product care 3 Disposal of your old product and batteries 4 3 Your home theatre 4 Main unit 4 Remote control 5 4 Connect your home theatre 6 Connectors 6 Connect to the TV 6 Connect audio from TV or other devices 7 5 Use your home theatre 7 Before you start 7 Choose your sound 7 Play a disc 8 Play from a USB storage device 9 More play features for disc or USB 9 Play from radio 9 Play audio from TV or other devices 10 6 Change settings 10 Access the setup menu 10 Change general settings 11 Change audio settings 11 Change video settings 11 Change preference settings 11 English EN

Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. DivX , DivX Certified and associated logos are registered trademarks of DivX, Inc. and are used under licence. DivX Ultra Certified to play DivX video with advanced features and premium content. ABOUT DIVX VIDEO: DivX is a digital video format created by DivX, Inc. This is an official DivX Certified device that plays DivX video. Visit www.divx.com for more information and software tools to convert your files into DivX video. ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified device must be registered in order to play DivX Video-on-Demand (VOD) content. To generate the registration code, locate the DivX VOD section in your device setup menu. Go to vod.divx.com with this code to complete the registration process and learn more about DivX VOD. LASER RADIATION DO NOT VIEW DIRECTLY WITH OPTICAL INSTRUMENTS CLASS 1M LASER PRODUCT 1 Notice Copyright This item incorporates copy protection technology that is protected by U.S. patents and other intellectual property rights of Rovi Corporation. Reverse engineering and disassembly are prohibited. Copyright in the UK Recording and playback of material may require consent. See Copyright Act 1956 and The Performers’ Protection Acts 1958 to 1972. Compliance This product is in compliance with the essential requirements and other relevant provisions of Directives 2006/95/EC (Low Voltage) and 2004/108/EC (EMC). Mains fuse (UK only) This product is fitted with an approved moulded plug. Should it become necessary to replace the mains fuse, this must be replaced with a fuse of the same value as indicated on the plug (example 10A). 1 Remove fuse cover and fuse. 2 The replacement fuse must comply with BS 1362 and have the ASTA approval mark. If the fuse is lost, contact your dealer in order to verify the correct type. 3 Refit the fuse cover. Note •• To conform to the EMC directive (2004/108/ EC), the mains plug on this product must not be detached from the mains cord. EN

on power cords or on other electrical equipment. • If the product is transported in temperatures below 5°C, unpack the product and wait until its temperature matches room temperature before connecting it to the power socket. • Visible and invisible laser radiation when open. Avoid exposure to the beam. • Do not touch the disc optical lens inside the disc compartment. Risk of overheating! • Never install this product in a confined space. Always leave a space of at least four inches around the product for ventilation. Ensure curtains or other objects never cover the ventilation slots on the product. Risk of contamination! • Do not mix batteries (old and new or carbon and alkaline etc.). • Remove batteries if they are exhausted or if the remote control is not to be used for a long time. • Batteries contain chemical substances; they should be disposed of properly. Product care • Do not insert any objects other than discs into the disc compartment. • Do not insert warped or cracked discs into the disc compartment. • Remove discs from the disc compartment if you are not using the product for an extended period of time. • Only use microfibre cloth to clean the product. 2 Important Read and understand all instructions before you use your home theatre. If damage is caused by failure to follow instructions, the warranty does not apply. Safety Risk of electric shock or fire! • Never expose the product and accessories to rain or water. Never place liquid containers, such as vases, near the product. If liquids are spilt on or into the product, disconnect it from the power socket immediately. Contact Philips Consumer Care to have the product checked before use. • Never place the product and accessories near naked flames or other heat sources, including direct sunlight. • Never insert objects into the ventilation slots or other openings on the product. • Where the mains plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable. • Disconnect the product from the power socket before lightning storms. • When you disconnect the power cord, always pull the plug, never the cable. Risk of short circuit or fire! • Before you connect the product to the power socket, ensure that the power voltage matches the value printed on the back or bottom of the product. Never connect the product to the power socket if the voltage is different. Risk of injury or damage to the home theatre! • For wall-mountable products, use only the supplied wall mount bracket. Secure the wall mount to a wall that can support the combined weight of the product and the wall mount. Koninklijke Philips Electronics N.V. bears no responsibility for improper wall mounting that result in accident, injury or damage. • For speakers with stands, use only the supplied stands. Secure the stands to the speakers tightly. Place the assembled stands on flat, level surfaces that can support the combined weight of the speaker and stand. English EN

Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your home theatre at www.philips.com/welcome. Main unit a Disc compartment b (Open/Close) Opens or closes the disc compartment. c (Play/Pause) Starts, pauses or resumes play. d (Stop) • Stops play. • In radio mode, erases the current preset radio station. e (Standby-On) Switches the home theatre on or to standby. f SOURCE Selects an audio/video source for the home theatre. g +/- Increases or decreases volume. h Display panel 6 7 8 Disposal of your old product and batteries Your product is designed and manufactured with high quality materials and components, which can be recycled and reused. When this crossed-out wheeled bin symbol is attached to a product it means that the product is covered by the European Directive 2002/96/ EC. Please inform yourself about the local separate collection system for electrical and electronic products. Please act according to your local rules and do not dispose of your old products with your normal household waste. Correct disposal of your old product helps to prevent potential negative consequences for the environment and human health. Your product contains batteries covered by the European Directive 2006/66/EC, which cannot be disposed of with normal household waste. Please inform yourself about the local rules on separate collection of batteries because correct disposal helps to prevent negative consequences for the environment and human health. EN

fast backward or fast forward. • In radio mode, press left or right to search for a radio station; press up or down to fine tune a radio frequency. f INFO Displays information about what is playing. g Playback buttons Control playback. h SURR (Surround Sound) Switches to surround sound or stereo sound. i AUDIO Selects an audio language or channel. j Numeric buttons Selects an item to play. k SUBTITLE Selects subtitle language for video. l SCREEN FIT Fits the picture format to the TV screen. m ZOOM Zooms into a video scene or picture. n REPEAT A-B Marks two points within a chapter or track for repeat play, or turns off repeat mode. o REPEAT / PROGRAM • Selects or turns off repeat mode. • In radio mode, programme radio stations. p ANGLE Displays options for different camera angles. q SOUND Selects a sound mode. r +/- Increases or decreases volume. s (Mute) Mutes or restores volume. t BACK Returns to a previous menu screen. u OK Confirms an entry or selection. v Source buttons • AUDIO SOURCE: Selects an audio input source. • RADIO: Switches to FM radio. • USB: Switches to USB storage device. • DISC: Switches to disc source. Remote control a (Standby-On) Switches the home theatre on or to standby. b (Open/Close) Opens or closes the disc compartment. c SLEEP Switches the home theatre to standby after the preset time selected. d SETUP Accesses or exits the setup menu. n q r s t u v m a b c d f g h i j k l p o e English EN

Connects to the analogue audio output on the TV or an analogue device. d VIDEO OUT-VIDEO Connects to the composite video input on the TV. e VIDEO OUT-Y Pb Pr Connects to the component video input on the TV. f FM ANTENNA Connects the FM antenna for radio reception. Connect to the TV Connect your home theatre directly to a TV through one of the following connectors (from highest to basic quality video): a Component video b Composite video Option 1: Connect to the TV through YPbPr (component video) Note •• The component video cable or connector might be labelled Y Cb Cr or YUV. (Cable not supplied) Component Video Out Component Video In TV 4 Connect your home theatre This section helps you connect your home theater to a TV and other devices. The basic connections of the home theatre with its accessories are provided in the Quick Start. For a comprehensive interactive guide, see www.connectivityguide.philips.com. Note •• Refer to the type plate at the back or bottom of the product for identification and supply ratings. •• Before you make or change any connections, ensure that all devices are disconnected from the socket. Connectors Connect other devices to your home theatre. Side connectors a (USB) Audio, video or picture input from a USB storage device. Back connectors a AC MAINS~ Connects to the power supply. b SPEAKERS Connects to the supplied speakers and subwoofer. EN

theatre This section helps you use the home theatre to play media from a wide range of sources. Before you start Make sure that you: • Make the necessary connections and complete the setup as described in the Quick Start. • Switch the TV to the correct source for the home theatre. Choose your sound This section helps you choose the ideal sound for your video or music. Change sound mode Select predefined sound modes to suit your video or music. Press SOUND repeatedly to cycle through the available sound modes. Sound mode Description ACTION / ROCK Enhanced low and high-range. Ideal for action movies and rock or pop music. DRAMA / JAZZ Clear mid and high-range. Ideal for drama movies and jazz music. CONCERT/ CLASSIC Neutral sound. Ideal for live concerts and classical music. SPORTS Moderate mid-range and surround effects for clear vocals and the atmosphere of a live sport venue. NIGHT Dynamically controlled sound mode suitable for watching movies at night or for non- intrusive background music. Option 2: Connect to the TV through composite video (CVBS) Note •• The composite video cable or connector might be labelled AV IN, VIDEO IN, COMPOSITE or BASEBAND. Connect audio from TV or other devices Use your home theatre to play audio from the TV or another device such as a cable box. Tip •• Press AUDIO SOURCE to select the audio output of your connection. (Cable not supplied) TV TV English EN

Access several useful features while viewing video. Note •• Available video options depend on the video source. Button Action / Searches slow-backwards or slow-forwards. Press repeatedly to change the search speed. For VCD/SVCD, slow-backwards search is not available. AUDIO Selects an audio language or channel. SUBTITLE Selects subtitle language for video. INFO Displays information about what is playing. REPEAT Repeats a chapter or title. REPEAT A-B Marks two points within a chapter for repeat play, or turns off repeat mode. ANGLE Displays options for different camera angles. Use picture options Access several useful features while viewing pictures. Button Action / Rotates the picture anti- clockwise or clockwise. / Skips to the previous or next picture. REPEAT Toggles between various repeat modes. INFO Displays photo albums in a thumbnail overview. Change surround sound mode Experience an immersive audio experience with surround sound modes. Press SURR repeatedly to cycle through the available surround modes. Option Description MULTI- CHANNEL Immersive multi-channel sound for an enhanced movie experience. STEREO Two-channel stereo sound. Ideal for listening to music. Play a disc The home theatre can play a wide variety of discs, including video, audio and mixed media (for example, a CD-R that contains JPEG pictures and MP3 music). 1 Insert a disc into the home theatre. 2 Press DISC. » » The disc plays or the disc main menu appears. 3 Press the following buttons to control play: Button Action Navigation buttons Navigate menus. OK Confirms an entry or selection. Starts, pauses or resumes play. Stops play. / Skips to the previous or next track, chapter or file. / Fast backwards or fast forwards. Press repeatedly to change the search speed. ZOOM Zooms into a video scene or picture. REPEAT A-B Marks two points within a chapter or track for repeat play, or turns off repeat mode. SCREEN FIT Fits the picture format to the TV screen. EN

Quick skip to a specific part of a video by entering the time of a scene. 1 During video play, press INFO. 2 Press the Navigation buttons and OK to select: • [TT Time] : Title time. • [Ch Time] : Chapter time. • [Disc Time] : Disc time. • [Track Time] : Track time. 3 Enter the time of the scene, then press OK. Play from radio The home theatre can store up to 40 radio stations. 1 Check that the FM antenna is connected. 2 Press RADIO. » » “AUTO INSTALL...PRESS PLAY’ appears on the display panel if you have not installed any radio stations. Press . 3 Press the following buttons to control play: Button Action / Selects a preset radio station. / Searches for a radio station. Fine tunes a radio frequency. Press and hold to erase the preset radio station. Press to stop the installation of radio stations. PROGRAM Manual: Press once to access programme mode, and press again to store the radio station. Automatic: Press and hold for five seconds to reinstall radio stations. Note •• AM and digital radio are not supported. •• If no stereo signal is detected, you are prompted to install the radio stations again. •• For the best reception, place the antenna away from the TV or other sources of radiation. Use audio options Access several useful features while audio is played. Button Action REPEAT Selects or turns off repeat mode. REPEAT A-B Marks two points within a track for repeat play, or turns off repeat mode. Play from a USB storage device The home theatre is fitted with a USB connector that allows you to view pictures, listen to music or watch movies stored on a USB storage device. 1 Connect the USB storage device to the home theatre. 2 Press USB. » » A content browser appears. 3 Select a file, then press OK. 4 Press the playback buttons to control play (see ‘Play a disc’ on page 8). Note •• If the USB storage device does not fit into the connector, use a USB extension cable. •• The home theatre does not support digital cameras that need a computer program to display photos. •• The USB storage device must be FAT or DOS- formatted, and Mass Storage Class compliant. More play features for disc or USB Several advanced features are available for video or picture playback from a disc or USB storage device. Play a musical slideshow Play music and pictures simultaneously to create a musical slideshow. The files must be stored on the same disc or USB storage device. 1 Play a music track. 2 Navigate to the picture file, then press OK to start slideshow. 3 Press to stop slideshow. 4 Press again to stop music. English EN

your home theatre. Caution •• Most of the settings are already configured with the best value for the home theatre. Unless you have a specific reason to change a setting, it is best to leave it at the default value. Access the setup menu 1 Press SETUP. » » The following menu appears. Symbol Description [General Setup] [Audio Setup] [Video Setup] [Preference Setup] 2 Select a setup menu, then press OK. See the following sections for information about how to change the settings of your home theatre. 3 Press BACK to return to the previous menu, or press SETUP to exit. Note •• You cannot change a setting that is greyed out. Play audio from TV or other devices Press AUDIO SOURCE repeatedly to select the audio output of the connected device (see ‘Connect audio from TV or other devices’ on page 7). EN

progressive scan mode. 4 Press OK to confirm your choice. Note •• The best setting is automatically selected for the TV. If you need to change the setting, ensure that the TV supports the new setting. •• Some video settings depend on the video source, ensure that the disc and the TV support the setting or feature. Change preference settings 1 Press SETUP. 2 Select [Preference Setup], then press OK. 3 Select and adjust the following settings: • [Audio] : Selects audio language for video. • [Subtitle] : Selects subtitle language for video. • [Disc Menu] : Selects menu language for video disc. • [Parental] : Restricts access to discs that are recorded with ratings. To play all discs irrespective of the rating, select level ‘8’. • [PBC] : Displays or skips the content menu for VCD and SVCD discs. • [Password] : Sets or changes a PIN code to play a restricted disc. Enter ‘0000’ if you do not have a PIN or if you have forgotten your PIN. • [DivX Subtitle] : Selects a character set that supports the DivX subtitle. • [Version Info.] : Displays the software version for the home theatre. • [Default] : Resets the home theatre to the default settings programmed at the factory. 4 Press OK to confirm your choice. Note •• If your preferred disc language is not available, you can select [Other] from the list and enter the 4-digit language code which can be found at the back of this manual. •• If you select a language that is not available on a disc, the home theatre uses the default language of the disc. •• You cannot reset disc lock, password (PIN code) and parental control settings to their default values. Change general settings 1 Press SETUP. 2 Select [General Setup], then press OK. 3 Select and adjust the following settings: • [OSD Language] : Selects the on- screen display menu language. • [Screen Saver] : Enables or disables screen saver mode. If enabled, the screen enters idle mode after 10 minutes of inactivity (for example, in pause or stop mode). • [DivX(R) VOD Code] : Displays the DivX VOD registration code for the home theatre. 4 Press OK to confirm your choice. Note •• Before you purchase DivX videos and play them on the home theatre, register the home theatre on www.divx.com using the DivX VOD code. Change audio settings 1 Press SETUP. 2 Select [Audio Setup], then press OK. 3 Select and adjust the following settings: • [Speakers Volume] : Sets the volume of each speaker to obtain the ideal audio balance. • [Speakers Delay] : Sets the delay time for centre and rear speakers to obtain an equal audio transmission from all the speakers. 4 Press OK to confirm your choice. Change video settings 1 Press SETUP. 2 Select [Video Setup], then press OK. 3 Select and adjust the following settings: • [TV System] : Selects a TV system that is compatible with the TV. • [TV Display] : Selects a picture display format to fit the TV screen • [Screen Fit] : Selects a full screen format that best fits to the TV screen. • [Picture Settings] : Selects a predefined colour setting. English EN

without notice. Region code The type plate on the back or bottom of the home theatre shows which regions it supports Playback media DVD-Video, DVD+R/+RW, DVD-R/-RW, CD-R/ CD-RW, Audio CD, Video CD/SVCD, Picture CD, MP3-CD, WMA-CD, DivX-CD, USB storage device File Format •• Audio: .mp3, .wma •• Video: .divx, .divx ultra, .mpeg, .mpg, .wmv (simple profile) •• Picture: .jpeg, .jpg Amplifier •• Total output power: 300 W RMS (30% THD) •• Frequency response: 20 Hz-20 kHz/±3 dB •• Signal-to-noise ratio: > 65 dB (CCIR)/ (A-weighted) •• Input sensitivity: • AUX: 1000 mV Country DVD Europe, United Kingdom Latin America Australia, New Zealand Russia, India China Asia Pacific, Taiwan, Korea 7 Update software To check for new updates, compare the current software version of your home theatre with the latest software version (if available) on the Philips website. Check software version 1 Press SETUP. 2 Select [Preference Setup] > [Version Info.], then press OK. » » The software version is displayed. Update software from a CD-R or USB 1 Check for the latest software version on www.philips.com/support. • Search for your model and click on ‘software&drivers’. 2 Download the software onto a CD-R or USB storage device. 3 Insert the CD-R or connect the USB storage device to the home theatre. 4 Follow the instructions on the TV to confirm the update. » » When complete, the home theatre automatically switches off and on again. • If not, disconnect the power cord for a few seconds and then reconnect it. Caution •• Do not turn off the power or remove the CD-R or USB storage device when the software update is in progress because you might damage the home theatre. EN

•• Wave length: 645 - 665 nm (DVD), 770 - 800 nm (CD) •• Output power: 6 mW (DVD), 7 mW (VCD/CD) •• Beam divergence: 60 degrees. Video •• Signal system: PAL/NTSC Audio •• Sampling frequency: • MP3: 32 kHz, 44.1 kHz, 48 kHz • WMA: 44.1 kHz, 48 kHz •• Constant bit rate: • MP3: 112 kbps - 320 kbps • WMA: 48 kbps - 192 kbps Radio •• Tuning range: FM 87.5-108 MHz (50 kHz) •• Signal-to-noise ratio: FM 50 dB •• Frequency response: FM 180 Hz-10 kHz/±6 dB USB •• Compatibility: USB •• Class support: UMS (USB Mass Storage Class) •• File system: FAT16, FAT32 •• Maximum memory support: < 160 GB Main Unit • Power supply: 110-240 V, ~50-60 Hz; •• Power consumption: 55 W •• Standby power consumption: ≤ 0.9 W •• Dimensions (WxHxD): 360 x 58 x 303 (mm) •• Weight: 2.3 kg Subwoofer •• Impedance: 12 ohm •• Speaker drivers: 133 mm (5.25”) woofer •• Frequency response: 20 Hz-150 Hz •• Dimensions (WxHxD): 160 x 267.5 x 265 (mm) •• Weight: 2.65 kg •• Cable length: 2 m Speakers •• System: full range satellite •• Speaker impedance: 3 ohm •• Speaker drivers: 3” full range •• Frequency response: 150 Hz-20 kHz •• Dimensions (W x H x D): 100 x 100 x 75 (mm) •• Weight: 0.30~0.66 kg/each •• Cable length: • Centre: 1 m • Front: 2 m • Rear: 10 m English EN

and select the correct input source (for example, AUDIO SOURCE) for the device you want to play. No sound from TV programme. •• Connect an audio cable from the audio input on the home theatre to the audio output on the TV, then press AUDIO SOURCE repeatedly to select the correct audio source. Distorted sound or echo. •• Ensure that the TV volume is muted or set to minimum if you are playing audio through the home theatre. Play Disc cannot be played. •• Clean the disc. •• Ensure that the home theatre supports the disc (see ‘Product specifications’ on page 12). •• Ensure that the home theatre supports the region code of the DVD. •• For DVD±RW or DVD±R, ensure that the disc is finalised. DivX video files cannot be played. •• Ensure that the DivX file is encoded according to the ‘Home Theatre Profile’ with the DivX encoder. •• Ensure that the DivX video file is complete. DivX subtitles do not display correctly. •• Ensure that the subtitle file name is the same as the movie file name. •• Select the correct character set: 1) Press SETUP. 2) Select [Preference Setup]. 3) Select [DivX Subtitle]. 4) Select a supported character set. 5) Press OK. The contents of a USB storage device cannot be read. •• Ensure that the format of the USB storage device is compatible with the home theatre (see ‘Product specifications’ on page 12). •• Ensure that the USB storage device is formatted with a file system that is supported by the home theatre. ‘No entry’ or ‘x’ sign appears on the TV. •• The operation is not possible. 9 Troubleshooting Warning •• Risk of electric shock. Never remove the casing of the product. To keep the warranty valid, never try to repair the product yourself. If you have problems using this product, check the following points before you request service. If you still have a problem, register your product and get support at www.philips.com/welcome. If you contact Philips, you will be asked for the model and serial number of your product. The model number and serial number are on the back or bottom of your product. Write the numbers here: Model No. __________________________ Serial No. ___________________________ Main unit The buttons on this home theatre do not work. •• Disconnect the home theatre from the socket for a few minutes, then reconnect. Picture No picture. •• Ensure that the TV is switched to the correct source for this home theatre. •• If this happens when you change the TV system, switch to its default mode: 1) Press . 2) Press . 3) Press SUBTITLE. •• If this happens when you switch on the progressive scan mode, switch to its default mode: 1) Press . 2) Press . 3) Press AUDIO. EN

9 software update 12 version 12 sound mode 7 surround 8 troubleshooting 14 subtitle language 8 T time search video 9 troubleshooting 14 TV audio from TV 7, 10 connect 6 U USB play 9 software update 12 10 Index A amplifier 12 audio connection 7 language 8 C care 3 change settings 10 connect audio from TV 7, 10 guide 6 other devices 7 TV 6 connectors 6 contact us 14 D disc play 8 supported discs 12 disposal of your product 4 F file formats 12 O overview connectors 6 main unit 4 remote control 5 P picture slide show 9 troubleshooting 14 play disc 8 options 8 radio 9 troubleshooting 14 USB storage device 9 product care 3 product specifications 12 English EN

9072 Chuang; Zhuang 9065 Church Slavic; Slavonic 6785 Chuvash 6786 Corsican 6779 Česky 6783 Dansk 6865 Deutsch 6869 Dzongkha 6890 English 6978 Esperanto 6979 Estonian 6984 Euskara 6985  6976 Faroese 7079 Français 7082 Frysk 7089 Fijian 7074 Gaelic; Scottish Gaelic 7168 Gallegan 7176 Georgian 7565 Gikuyu; Kikuyu 7573 Guarani 7178 Gujarati 7185 Hausa 7265 Herero 7290 Hindi 7273 Hiri Motu 7279 Hrwatski 6779 Ido 7379 Interlingua (International)7365 Interlingue 7365 Inuktitut 7385 Inupiaq 7375 Irish 7165 Íslenska 7383 Italiano 7384 Ivrit 7269 Japanese 7465 Javanese 7486 Kalaallisut 7576 Kannada 7578 Kashmiri 7583 Kazakh 7575 Kernewek 7587 Khmer 7577 Kinyarwanda 8287 Kirghiz 7589 Komi 7586 Korean 7579 Kuanyama; Kwanyama 7574 Kurdish 7585 Lao 7679 Latina 7665 Latvian 7686 Letzeburgesch; 7666 Limburgan; Limburger 7673 Lingala 7678 Lithuanian 7684 Luxembourgish; 7666 Macedonian 7775 Malagasy 7771 Magyar 7285 Malayalam 7776 Maltese 7784 Manx 7186 Maori 7773 Marathi 7782 Marshallese 7772 Moldavian 7779 Mongolian 7778 Nauru 7865 Navaho; Navajo 7886 Ndebele, North 7868 Ndebele, South 7882 Ndonga 7871 Nederlands 7876 Nepali 7869 Norsk 7879 Northern Sami 8369 North Ndebele 7868 Norwegian Nynorsk; 7878 Occitan; Provencal 7967 Old Bulgarian; Old Slavonic 6785 Oriya 7982 Oromo 7977 Ossetian; Ossetic 7983 Pali 8073 Panjabi 8065 Persian 7065 Polski 8076 Português 8084 Pushto 8083 Russian 8285 Quechua 8185 Raeto-Romance 8277 Romanian 8279 Rundi 8278 Samoan 8377 Sango 8371 Sanskrit 8365 Sardinian 8367 Serbian 8382 Shona 8378 Shqip 8381 Sindhi 8368 Sinhalese 8373 Slovensky 8373 Slovenian 8376 Somali 8379 Sotho; Southern 8384 South Ndebele 7882 Sundanese 8385 Suomi 7073 Swahili 8387 Swati 8383 Svenska 8386 Tagalog 8476 Tahitian 8489 Tajik 8471 Tamil 8465 Tatar 8484 Telugu 8469 Thai 8472 Tibetan 6679 Tigrinya 8473 Tonga (Tonga Islands) 8479 Tsonga 8483 Tswana 8478 Türkçe 8482 Turkmen 8475 Twi 8487 Uighur 8571 Ukrainian 8575 Urdu 8582 Uzbek 8590 Vietnamese 8673 Volapuk 8679 Walloon 8765 Welsh 6789 Wolof 8779 Xhosa 8872 Yiddish 8973 Yoruba 8979 Zulu 9085 中文 Language Code 1_HTS5220_12_EN-US.indd Sec2:33 1_HTS5220_12_EN-US.indd Sec2:33 4/14/2010 10:24:07 AM 4/14/2010 10:24:07 AM

All rights reserved. sgpst_1102/05_v1 bk.indd Sec4:48 bk.indd Sec4:48 1/12/2010 2:54:37 PM 1/12/2010 2:54:37 PM