Imation IronKey Workspace W500 Operation & User’s Manual

Imation and Imation logo, IronKey and IronKey logo are trademarks of Imation Corp. All other trademarks are the property of their respective owners. Imation Enterprises Corp. 1 Imation Way Oakdale, MN 55128-3414 USA www.imation.com Support: support.ironkey.com ...

4 Supported Devices 5 Hardware requirements 5 Software Requirements 6 Imation documentation 6 Glossary 7 Setting up the Provisioning Tool 9 Managing provisioning profiles 12 Creating profiles 12 Editing and deleting profiles 14 Provisioning devices 15 Reviewing reports 19 Knowledge Base 19 ...

PROVISIONING TOOL The IronKey Workspace Provisioning Tool significantly speeds up the deployment of IronKey Workspace W500 devices. The Provisioning Tool allows you to install a Windows To Go image on multiple devices at the same time. You control what is installed using provisioning profiles. When you provision devices, the p ...

PROVISIONING TOOL SUPPORTED DEVICES IronKey Workspace W500 IronKey Workspace W500 is a trusted, secure USB flash drive. As a Microsoft-certified Windows To Go device, IronKey Workspace W500, allows users to change virtually any computer into their own secure personal workspace, capable of using all resources on the host comput ...

PROVISIONING TOOL SOFTWARE REQUIREMENTS • IronKey Workspace Provisioning Tool • Microsoft Windows To Go (WTG) image file (.wim)—Both 32-bit and/or 64-bit architecture * If IronKey Workspace W500 devices will be managed by IronKey Enterprise Server, you must install the IronKey Control Panel onto the Windows To Go image. ...

PROVISIONING TOOL GLOSSARY Table 1: Common terminology Term Definition Activation The process by which the user activates a device (using the activation code sent by the administrator). Activation binds the user to the device in IronKey Enterprise Server and applies policies to the device. Admin Code When you provision an Iron ...

PROVISIONING TOOL provisioning profile A set of options (including the Windows To Go image file, Admin Code, and device management options) that determine what is loaded on devices during provisioning. The Provisioning software stores these profiles for repeated use. Provisioning Tool (PT) This is the software and hardware (US ...

Before you can provision devices, you must install the Provisioning Tool software to the Provisioning computer and set up the USB hubs. For more information about hardware requirements for the Provisioning computer or USB hubs, see “Hardware requirements” on page 5. On the Provisioning computer, it is recommended that y ...

5. If you want to start the Provisioning tool application, double-click the IKWorkspaceProvisioner.exe file from the following location: ..\W8Appliance_V1.0\PROVISIONER\IKWorkspaceProvisioner.exe Click Yes to accept the User Account Control (UAC) message. To set up the USB 3.0 hub 1. Connect the power adapter for the USB 3 ...