InFocus TD61 Operation & User’s Manual
Text of InFocus TD61 Operation & User’s Manual
Warning: The power cord and cables associated with this product contain lead, a chemical known to the state of California
to cause birth defects or other reproductive harm Wash hands after handling.
Warning: This product has a lamp which contains a very small amount of mercury. Dispose of it as required by local, state,
or federal ordinances and regulations. For more information, see www.elae.org
Introduction … 3
1.1 About the TD61 … 4
1.2 Accessories for TD61 … 6
1.3 Using the Remote Control … 8
1.4 Your Safety is Important … 10
2
Installation … 13
2.1 What You Will Do … 14
2.2 Unpacking the TD61 … 16
2.3 Installing the TD61 … 18
2.4 Connecting Source Cables … 20
2.5 Connecting RS232/RS485 Cables … 22
3
Adjusting … 23
3.1 Aligning the Image … 24
3.2 Adjusting TD61 To Its Source … 28
3.3 What Does Colorspace
4.2 Reading the Alpha Numeric Display … 46
4.3 Controlling TD61 with Remote … 48
4.4 Controlling TD61 with RS232/RS485 … 50
5
Maintenance … 51
5.1 Changing a Lamp … 52
5.2 Changing the Air Filter … 54
6
Reference Section … 55
6.1 Remote Control Functions … 56
6.2 Menus Structures: … 60
6.3 TD61 Drawings … 84
6.4 Connector Wiring … 86
6.5 Regulatory Information … 88
6.6 Specifications for TD61 … 90
About the TD61 … 4
1.2
Accessories for TD61 … 6
1.3
Using the Remote Control … 8
1.4
Your Safety is Important … 10
1.1 About the TD61
The InFocus TD61 is a 61" rear-projection display in a native 16x9 format, designed to outperform large
format plasma displays. It combines ultra-thin (6.5" deep) rear projection, DLP technology and rugged
reliable design for outstanding performance in digital signage applications.
Scale
TD61 will up sample resolutions up to a resolu-
tion of 1280 x 720 (720p), and will downsample reso-
lutions up to 1600 x 1200.
Video inputs
A standar
1.2 Accessories for TD61
The accessory kit for the TD61 contains the following items.
Each TD61 comes with (quantity)
• AC power cable (1)
• VGA cable (1)
• 8-32x3/8 Pan Head Phillips #2 screw (4)
• Wall Mounting Bar (1)
• Lower Retaining Bracket(1)
• Remote Control with batteries(1)
• Quick Start Card
• T25 L-Key Torx Wrench
• Removable I/O cover
Customer furnished parts
If you will be controlling the TD61 via RS232 or
RS485, you will
T-25 L-Key Torx Wrench
VGA Cable
Lower Retaining Bracket
Wall Mounting Bracket
Removable I/O Cover
DB9-RJ45 Adapter
8-32x3/8 pan head screws
1.3 Using the Remote Control
Most original setup operations are performed with the remote control. Later, RS232 control may be
used.
The remote control, shown below, lets you control
the TD61 and get it setup and adjusted initially.
For a complete description of remote control func-
tions. See 6.1 “Remote Control Functions” on
page 56.