InFocus IN102 Reference Manual

2 Table of contents Introduction..................3 Projector features........................... 3 Shipping contents .......................... 4 Projector exterior view ................... 5 Controls and functions ................... 6 Positioning your projector.......................9 Choosing a location ....................... 9 Obtaining a preferred projected image size.................................... 10 Connection............... ...

friendly design to deliver high reliability and ease of use. The projector offers the following features. • Wall color correction allowing projection on surfaces of several predefined colors • Quick auto search speeding up the signal detecting process • Selectable password protected function • Up to 11 sets of picture modes ...

these items are missing, please contact your place of purchase. Standard accessories The supplied accessories will be suitable for your region, and may differ from those illustrated. Optional accessories 1. Ceiling mount, wall mount 2. LiteShow II wireless presentation adaptor 3. Pull down and pull up 4:3 screens 4. Cables and adaptors 5. Repl ...

1. External control panel (See "Projector and remote control" on page 6 for details.) 2. Vent (heated air exhaust) 3. Quick-release button 4. Lens cover 5. Focus ring and Zoom ring 6. Front IR remote sensor 7. Projection lens 8. AC power cord inlet 9. RS-232 control port 10. RGB signal output socket 11. RGB (PC)/Component video (YPbPr/YCbCr) signal input socket 12. Video input socket 13. S-Video input socket 14. Audio ...

Projector and remote control 1. Focus ring Adjusts the focus of the projected image. See "Fine-tuning the image size and clarity" on page 26 for details. 2. Zoom ring Adjusts the size of the image. See "Fine-tuning the image size and clarity" on page 26 for details. 3. TEMPerature indicator light Lights up red if the projector's temperature becomes too high. See "Indicators" on page 50 for details. 4. POWER indicator l ...

(OSD) menu. Goes back to previous OSD menu, exits and saves menu settings. See "Using the menus" on page 21 for details. 9. LAMP indicator light Indicates the status of the lamp. Lights up or flashes when the lamp has developed a problem. See "Indicators" on page 50 for details. 10. AUTO Automatically determines the best picture timings for the displayed image. See "Auto-adjusting the image" on pag ...

Infra-Red (IR) remote control sensor is located on the front of the projector. The remote control must be held at an angle within 30 degrees perpendicular to the projector's IR remote control sensor to function correctly. The distance between the remote control and the sensor should not exceed 8 meters (~ 26 feet). Make sure that there are no obstacles between the remote control and the IR sensor on the project ...

9 Positioning your projector Choosing a location Your room layout or personal preference will dictate which installation location you select. Take into consideration the size and position of your screen, the location of a suitable power outlet, as well as the location and distance between the projector and the rest of your equipment. Your projector is designed to be installed in one of four possible installation locations: 1. Fro ...

10 Obtaining a preferred projected image size The distance from the projector lens to the screen, the zoom setting, and the video format all factor into the resulting projected image size. 4:3 is the native aspect ratio of this projector. To be able to project a complete 16:9 (widescreen) aspect ratio image, the projector can resize and scale a widescreen image to the projector's native aspect width. This will result in a proport ...

11 How to determine the position of the projector for a given screen size 1. Select your screen size. 2. Refer to the table and find the closest match to your screen size in the left columns labelled "4:3 screen diagonal". Using this value, look across this row to the right to find the corresponding average distance from screen value in the column labelled "Average". This is the projection distance. 3. On that same row, look acro ...

12 Projection dimensions Refer to "Dimensions" on page 53 for the center of lens dimensions of this projector before calculating the appropriate position. There is 3% tolerance among these numbers due to optical component variations. InFocus recommends that if you intend to permanently install the projector, you should physically test the projection size and distance using the actual projector before you permanently install it, s ...

1. Turn all equipment off before making any connections. 2. Use the correct signal cables for each source. 3. Ensure the cables are firmly inserted. In the connections shown below, some cables may not be included with the projector (see "Shipping contents" on page 4). Additional cables can be purchased from InFocus.com in select areas, your dealer and/or from a commercia ...

Connecting a computer The projector provides a VGA input socket that allows you to connect it to both IBM® compatibles and Macintosh® computers. A Mac adapter is needed if you are connecting legacy version Macintosh computers. To connect the projector to a notebook or desktop computer: 1. Take the supplied VGA cable and connect one end to the D-Sub output socket of the computer. 2. Connect the other end of t ...

If you want to view your presentation close-up on a monitor as well as on the screen, you can connect the MONITOR OUT signal output socket on the projector to an external monitor with a VGA cable following the instructions below: To connect the projector to a monitor: 1. Connect the projector to a computer as described in "Connecting a computer" on page 14. 2. Take a suitable VGA cable (only one supplied) and connect one ...

You can connect your projector to various video source devices that provide any one of the following output sockets: • Component video • S-Video • Video (composite) You only need to connect the projector to a single video source device; however each provides a different level of video quality. The method you choose will most likely depend upon the availability of matching terminals on both the projector a ...

Examine your video source device to determine if it has a set of unused Component video output sockets available: • If so, you can continue with this procedure. • If not, you will need to reassess which method you can use to connect to the device. To connect the projector to a Component video source device: 1. Take a Component video to VGA (D-Sub) adaptor cable and connect the end with 3 RCA type ...

Examine your video source device to determine if it has an unused S-Video output socket available: • If so, you can continue with this procedure. • If not, you will need to reassess which method you can use to connect to the device. To connect the projector to an S-Video source device: 1. Take an S-Video cable and connect one end to the S-Video output socket of the video source device. 2. Connect the ot ...

Examine your video source device to determine if it has a set of unused composite video output sockets available: • If so, you can continue with this procedure. • If not, you will need to reassess which method you can use to connect to the device. To connect the projector to a composite video source device: 1. Take a video cable and connect one end to the composite video output socket of the vide ...

1. Plug the power cord into the projector and into a wall socket. Turn on the wall socket switch, if applicable. Check that the POWER indicator light on the projector lights orange after power has been applied. 2. Remove the lens cap. If it is closed, it could become deformed due to the heat produced by the projection lamp. 3. Press POWER on the projector or remote control to start the projector. The POWER i ...