Ingenico iCT250 Operation & User’s Manual

2 3. Declaration of Conformity 5 4. Installing the Terminal 6 5. Using the Terminal 8 6. Sale (Inserting a Card) 10 7. Sale (Swiping a Card) 11 8. Voice Referrals 12 9. Setting the Referral Password 13 10. Refund 14 11. Purchase with Cashback 15 12. Cash Advance 15 13. Add ...

instructions on transaction processing, printing reports and general maintenance of the terminal. 2. Important Safety Instructions Upon receipt of your terminal you should check for signs of tampering of the equipment. It is strongly ...

• DO NOT allow any water to enter inside the case. Remove any dust from the case using a damp cloth. To clean off accumulated dirt and grime, use a damp cloth that has previously been dipped in mild soap and water. Wring out thoroughly to remove excess water before use. • DO NOT use solvents, cleaning fluids or abra ...

than those specified and/or supplied by the manufacturer. Ensure all cables are routed to prevent damage or accidental contact. MODEM General Description The Terminal has an integral modem that allows the Terminal to transfer transaction d ...

The CE marking indicates that the EFT930G complies with the requirements of European Directive 1999/5/EC of 9th March 1999. on Radio and Telecommunications Terminal equipment for: • The protection of the health and safety of the user and any other person. • The protection requirements with respect to electromagnetic co ...

button. The terminal will start to dial the Host computer and a number of communication messages will be displayed. 6. The terminal may then contact any card acquirers it is configured to accept. Further communication messages will be displayed. Dual Comms Mode You should use the keys ...

card types that your terminal will accept. 8. Finally, the terminal will dial the Host computer to report the successful installation. Installation is now complete and the terminal will display the READY prompt. Your terminal is now ready for use. Check the date and time on your terminal. I ...

The card should be swiped with the black magnetic stripe facing the terminal and running along the bottom of the card. Make sure that the bottom of the card runs firmly along the bottom of the card swipe and that the card is swiped at even speed. The speed of the card swipe should not be too slow as this can sometimes cause problems whe ...

through the options and then press the GREEN button to select the appropriate one. Application Selection Some cards support multiple card schemes and during the transaction flow the cardholder may be required to choose which card scheme to use. At this time you should hand the terminal to the Car ...