Interlogix TVM-1701 Operation & User’s Manual

Text of Interlogix TVM-1701 Operation & User’s Manual

TVM-1701 / TVM-1850 / TVM-1901

/ TVM-2150 Monitor User Manual P/N 1072775C-EN • REV 1.0 • ISS 05MAY14

© 2014 United Technologies Corporation

Interlogix is part of UTC Building & Industrial Systems, a unit of United Technologies Corporation. All rights reserved. Trademarks and patents Trade names used in this document may be trademarks or registered trademarks of the manufacturers or vendors of the respective products.. Manufacturer United Technologies Corporation 2955 Red Hill Avenue, Costa Mesa, CA 92626-5923, USA Authorized EU manufacturing r

Important safeguards 1

Introduction 2 Features 2 Assembling the monitor 3 Connections 3 Front panel controls 4 Control panel (TVM-1701 model) 4 Control panel (TVM-1901/ TVM-1850/ TVM-2150 models) 4 Changing a monitor parameter 5 Hot keys 5 Adjustment procedure 5 OSD function 5 VGA menu 6 Cam menu (HDMI) 8 Self-diagnosis 10 Removing the monitor stand 10 Attaching the monitor stand 11 Troubleshooting

unattended and unused for long periods

of time, unplug the unit from the wall outlet and disconnect the cable system. This will prevent damage to the unit due to lightning and power line surges. 8. Mains plug (2 pin/3 pin): • Do not remove the grounding or earth connection from the power supply / mains plug. • Always remember to unplug the monitor from the power supply under the following circumstances if the monitor will not be used for

Assembling the monitor

The monitors are designed for use on a desktop. The arm of the monitor stand is shipped pre- installed on the monitor. To assemble the monitor: 1. Put a smooth pad or cloth on a level surface. Place the monitor on it facing downwards. 2. Insert the arm of the monitor stand of the monitor into the pedestal foot provided. See figures below. TVM-1701/TVM-1 901 models TVM-1850/TVM-2150 models To disassemble the monitor: 1.

Front panel controls

Control panel (TVM-1701 model) 1. POWER indicator Shows both normal operation and power management status with power LED 2. POWER Switches the monitor on and off. 3. MENU Turns the OSD window on. Turns the OSD window off and moves from sub menu to top menu in the OSD window. *Push the menu button for 5seconds when you want to unlock the keypad lock. 4. ▼ Down Arrow (*) Primary Function: Used to decrease the volume. Seco

▲ Up Arrow (*)

Primary Function: Automatically adjusts the display to the most optimal setting possible. (VGA mode only) Secondary Function: Allows for vertical scrolling in the OSD menu. 6. ▼ Down Arrow Allows for vertical scrolling in the OSD menu. 7. SOURCE (*) Used to select different input sources. Press the UP or DOWN arrow to scroll through the available sources, and press SOURCE arrow to confirm selection. 8. MENU Turns the O

Adjust the brightness of the image.

2. Contrast Adjust the contrast of the image, the difference between light and dark areas on the screen. 3. Color Tone Choose a different preset color temperature or set your own customized color parameters. (Normal/ Warm/ Cool/ User). 4. Advanced Setting 4-1 Noise Reduction. Not used. 4-2 Back Light Adjust the back light to be brighter

Interlogix Monitor Owners Instructions: