Intermatic EM14PS Installation Manual
Text of Intermatic EM14PS Installation Manual
INSTALLING THE EM14PS
The EM14PS photosensor is designed to be wired directly
to the EM1400 for single-zone outdoor lighting control
applications.
Connect the EM14PS to the EM1400MC input using two
#18 wires. Note that the wires are polarized. If they are
reversed no damage will be done but the reading on the
display will show as 1024 and will not change.
Note that it must be wired to the Master Panel with the
clock display. The slave panels do not have ph