Intermec CK30 User Manual Addendum

Intermec Technologies Corporation Corporate Headquarters 6001 36th Ave. W. Everett, WA 98203 U.S.A. www.intermec.com The information contained herein is proprietary and is provided solely for the purpose of allowing customers to operate and service Intermec-manufactured equipment and is not to be released, reproduced, or used for any other purpose without written permission of Intermec. Information and sp ...

iii Contents What’s New in Service Pack 2.................................................................................... 5 What Does CCX Compliance Mean? ........................................................................ 5 What is EAN.UCC Composite Symbology? .............................................................. 5 Setting Funk Odyssey Security............................................. ...

5 What’s New in Service Pack 2 This addendum covers the new features available in service pack 2 for the CK30 Handheld Computer. Use this addendum in combination with the CK30 Handheld Computer User’s Manual (P/N 073528-003) for complete information for service pack 2. These features have been added or modified: • CCX v1.0 compliance • EAN.UCC Composite symbology • Funk Odyssey™ security • Abili ...

The type of security you choose is not dependent on your authentication server. For example, you can use Funk security with a Microsoft server. To use Funk security, you need to: • Select Funk security as your security choice • Select a profile • Set profile settings • Download a certificate (if necessary) Selecting Funk as Your Security Choice The default security choice is Microsoft. If you want t ...

7 5 (Optional) Select Change Profile Label to give the active profile a meaningful name. 6 Repeat Steps 4 and 5 for as many profiles as you want to define. 7 Select the profile you want to configure with security settings. 8 Press Esc to return to the 802.11 Radio menu. 9 Configure your security settings. Configuring WPA Security Wi-Fi Protected Access (WPA) is a strongly enhanced, interoperable Wi-Fi securit ...

• CK30 with the 802.11b/g radio and the 802.1x/WPA security option To enable WPA security on your CK30 1 Make sure you have selected Funk as your security choice. 2 Make sure you have configured the communications and radio parameters on your CK30. 3 Press C and then B to open the System Main Menu. 4 Choose Configuration Utility > Communications > 802.11 Radio > Profile Settings. 5 For Association, choose ...

9 b For Validate Server Certificate, choose Enabled and press Enter. c You must enter a User Name and Subject Name. You can also enter a Server Common Name if you want to increase your level of security. 8 Exit the Configuration Utility. To enable WPA-PSK security on your CK30 1 Make sure you have selected Funk as your security choice. 2 Make sure you have configured the communications and radio parameters on ...

Note: You can also use a MobileLAN access point with software release 1.80 or later as an authentication server. For help, see the MobileLAN access System Manual (P/N 067150) or MobileLAN access WA2X System Manual (P/N 073915). • An access point with an 802.11b/g radio • A CK30 with an 802.11b/g radio and the 802.1x/WPA security option To enable 802.1x security on your CK30 1 Make sure you have selecte ...

11 If you choose TLS: a Load a user and root certificate on your CK30. For help, see “Loading a Certificate” on page 13 for help. b For Validate Server Certificate, choose Enabled and press Enter. c You can also enter a User Name, Subject Name and Server Common Name if you want to increase your level of security. 8 Exit the Configuration Utility. Configuring LEAP Security Lightweight Extensible Authentica ...

5 For Authentication, choose LEAP and then press Enter. 6 For Association, choose Open or Network EAP and then press Enter. 7 For Encryption, choose WEP and then press Enter. 8 Select User name, type your user name, and then press Enter. 9 Select Password prompt, choose Enter password now, and then press Enter. Note: You can use Prompt for password to troubleshoot your connection to the network if you have ...

13 7 For Authentication, choose None and then press Enter. 8 Select WEP Key and then define a value for each WEP key. You can define up to four WEP keys. Enter an ASCII key or a hex key that is either 5 bytes or 13 bytes long depending on the capability of the radio. Set a 5- byte value for 64-bit WEP or a 13-byte value for 128-bit WEP. Hex keys must be preceded by 0x and contain 5 or 13 hex pairs. 9 Press Es ...

4 In the Enroll Certificates dialog box, enter the User Name, Password, and Server (IP address) to log into the CA server. 5 Press Enter. A dialog box appears asking if you want to load the root certificate. 6 Press Enter for yes. The Enrollment Tool message box appears telling you that the user certificate has been added. 7 Press Enter to close the Enrollment Tool message box. 8 Configure your CK30 for WP ...

15 4 Select Import Root Certificates to load the .cer file. A dialog box appears asking if you want to add the certificate to the root store. 5 Press Enter to add the certificate. A message box appears telling you that the root certificate has been imported. 6 Press Enter to close the Success message box. 7 Select Import User Certificate to load the .der and .pvk files. A message box appears telling you that ...

Disabling or Modifying Keypad Functions You can disable the functionality of several keys on the keypad if you want to restrict the ability to perform adjustments made from the keypad, such as changing the contrast. You can disable these keypad functions: • Beeper volume • Display contrast • Backlight on and off • Task Manager (opened by pressing Alt and then Tab) You can modify this keypad functio ...

17 4 Choose the function you want to disable from the Keypad menu, select Disable from the function dialog box, and then press Enter. 5 Exit the Configuration Utility. To change the I key functionality 1 Press C and then B. The System Main Menu appears. 2 Select the Configuration Utility. 3 Select Device Settings > Keypad. 4 From the Keypad menu, select Configure Boot Functionality. 5 Choose Warm Boot or Cold ...

Understanding Radio Power Management Settings There are now only two choices for radio power management settings on the CK30. These radio power management settings apply to Microsoft security. Use this table to understand the new power management settings. New Settings Description Disabled (CAM) Specifies continuous access mode (CAM) and is the default. Enabled (FAST PSP) Specifies a fast power saving mode ...

Everett, WA 98203 U.S.A. www.intermec.com © 2004 Intermec Technologies Corp. All Rights Reserved CK30 Handheld Computer User’s Manual Addendum *074726-001* P/N 074726-001 ...