Intermec EasyCoder 3400e Install Manual

You can use two different cutter trays to collect cut labels from your 3400, 4420, and 4440 printers: • The basic cutter tray (Part No. 067324) • The deluxe cutter tray (Part No. 066369) Both trays hook easily onto the cutter. On the deluxe cutter tray, you can adjust the angle of the tray and ...

To attach the deluxe cutter tray Note: Depending on the angle of the tray, it may hang down below the bottom of the printer. If you want the tray to rest at a steep angle, move your printer so that the front is at the edge of the surface it is sitting on. 1. Attach the cutter to your printer. For help, see t ...

Feed/Pause Power/Data Alert Empty/Pause Intermec Intermec 4420 Cutter cover 44XXT.001 Deluxe tray Tray base Thumbscrew Base thumbscrew 6. Making sure that the top of the tray rests against the cutter cover, adjust the tray to the angle you choose. 7. Tighten the thumbscrews to secure the angle of the tray. ...

P.O. Box 4280 Everett, WA 98203-9280 © 1998 Intermec All Rights Reserved P/N 067548-001 ...