Invacare KSS Installation & Operation Instruction

CHILD/JUNIOR SIZES: 10R, 12R, 14R, 16R ADULT SIZES: 16T, 18T, 20T STORM JR. TRANSPORT READY OPTION (TRRO) 12R, 14R, 16R 1 Assembly, Installation, and Operating Instructions NOTE: The KSS seating system is defined as a seating system which includes the following: CHILD/ STORM Jr. JUNIOR ADULT (TRRO) 10R, 12R, 16T,18T 12R, 14R FEATURES 14R, ...

the top and bottom sets of holes. Refer to the ATTACH- MENT POINTS chart in this instruction sheet for optional attachment points. 4. Install four (4) of the mounting screws through the holes in the growth bracket and into the underside of the Ulti-Mate Base. Securely tighten. NOTE: On the seat, the sta ...

growth bracket to the back. 3. Adjust the back up or down until the desired mount- ing position is obtained. 4. Securely tighten the two (2) mounting screws. 5. If more adjustment is needed, the adjustment screws can be completely removed, and the bracket set to a NEW T-nutted hole location. Refer to th ...

FIGURE 4 - FIGURE 4 - FIGURE 4 - FIGURE 4 - AAAAATT TTTT TT TTAAAAACHING/ADJUSTING CHING/ADJUSTING CHING/ADJUSTING CHING/ADJUSTING CHING/ADJUSTING THE LA THE LA THE LA THE LA THE LATERAL SUPPOR TERAL SUPPOR TERAL SUPPOR TERAL SUPPOR TERAL SUPPORTS TS TS TS TS Standard Adjustment T-nutted Mounting Holes Mounting Scr ...

FIGURE 6 - FIGURE 6 - FIGURE 6 - FIGURE 6 - AAAAATT TTTT TT TTAAAAACHING/ADJUSTING CHING/ADJUSTING CHING/ADJUSTING CHING/ADJUSTING CHING/ADJUSTING THE THE THE THE THE MOUNTING HOOKS MOUNTING HOOKS MOUNTING HOOKS MOUNTING HOOKS MOUNTING HOOKS * Mounting Screws * Mounting Hook Mounting Screws Slot Mounting Hooks * These items are only needed on th ...

FIGURE 7 - FIGURE 7 - FIGURE 7 - FIGURE 7 - ADJUSTING ADJUSTING ADJUSTING ADJUSTING ADJUSTING THE NECK SUPPOR THE NECK SUPPOR THE NECK SUPPOR THE NECK SUPPOR THE NECK SUPPORTTTTT NOTE: Only the curved back is shown for clarity. The neck support on the Ulti-mate Air Back adjusts in the same manner. Neck Support Bracket Thumbscrew Knob Thumb- scre ...

FIGURE 8 - FIGURE 8 - FIGURE 8 - FIGURE 8 - AAAAATT TTTT TT TTAAAAACHING/ADJUSTING CHING/ADJUSTING CHING/ADJUSTING CHING/ADJUSTING CHING/ADJUSTING THE THE THE THE THE HEIGHT/REVERSING HEIGHT/REVERSING HEIGHT/REVERSING HEIGHT/REVERSING HEIGHT/REVERSING THE CUSHION/ THE CUSHION/ THE CUSHION/ THE CUSHION/ THE CUSHION/ USING USING USING USING USING ...

BELT (FIGURES 9 AND 10) Attaching the Lap Belt WARNING It is strongly recommended that the lap belt be strapped across the hip area with an angle of 45 o to the seating surface. Angles less than 45 o make it easier for the user to slip under the belt if it is improperly tightened. 1. The lap belt can be anchored in one (1) of the t ...

SEATING SYSTEM IN THE WHEELCHAIR With the individual positioned in the KSS seating sys- tem: 1. Check that the width and height of the system is fitted properly to the individual using the system. If adjustment is needed, refer to ADJUSTING THE GROWTH BRACKET in this instruction sheet. 2. Check to make sure the neck support is ...

TWIST RELEASE CLAMPS FOR B TWIST RELEASE CLAMPS FOR B TWIST RELEASE CLAMPS FOR B TWIST RELEASE CLAMPS FOR BAAAAACK CK CK CK CK Twist Release Cane Clamp Inside Back Cane Seat Rail Back Mounting Hook Socket Screw Locking Mechanism FIGURE 12- QUICK RELEASE CLAMPS FOR SEA FIG ...