Iomega CD-RW Drive Quick Install Manual

support for USB 2.0, you must install a USB 2.0 adapter card for your Iomega ® CD-RW USB drive to run at USB 2.0 speeds. If you do not have a USB 2.0 card installed, the Iomega CD-RW USB drive will still work connected to a standard USB connection at stand ...

® CD-RW USB drive, start your computer, wait for the operating system to load, then insert the Solutions CD. The Solutions CD menu should open automatically when you insert the CD. If it does not, double-click the Solutions CD icon in My Computer, then double-click the Start icon. Mac ® users double-click the Solutions CD ...

® HotBurn ® Software. Click the Iomega HotBurn button. Select Click to Install to start the HotBurn software installation. The HotBurn software contains the system software necessary to use your CD-RW drive. For more detailed installation instructions or troubleshooting information select the User’s Manual and prin ...

the back of the drive. NOTE: The headphone jack is located on the front of the drive. Plug in headphones only while listening to audio CDs. 3 ...

“Audio In” line on the back of your computer. Ensure the computer and the drive are off before connecting the audio to your computer. 4 ...

Connect the power supply and cable to the Iomega ® CD-RW drive. To prevent damage to the power plug, connect straight on with the arrow side up. Do not twist. Examine the connection carefully to avoid bending pins. The green power light on the front of the drive flashes momentarily when you plug in the powe ...

Examine the connection carefully for the correct orientation, then connect the cable with the USB symbol on the connector facing up. 6 ...

2.0 adapter card connection on your computer. Use the USB cable included. NOTE: If you cannot identify the USB 2.0 connection, refer to the documentation for your card. If you do not have a USB 2.0 adapter card installed, you can still connect the drive to a standard USB connection. The Iomega ...

CD-R discs—Use CD-R discs for audio recordings or other permanent storage. CD-R discs can be written to only once. 1. Double-click the HotBurn ® icon on your desktop. 2. Click one of the options from the HotBurn screen. 3. When prompted, insert a blank CD-R disc into the Iomega CD-RW drive. 4. Follow the onscr ...