iRobot Scooba 5900 Quick Start Manual
Text of iRobot Scooba 5900 Quick Start Manual
Instructional videos available at www.irobot.com/usetips
Understand how iRobot Scooba cleans
Before You Get Started
Scooba’s Cleaning Pattern
Scooba is a robot that cleans differently than
the way most people clean their floors. Scooba
uses iRobot’s AWARE™ Robot Intelligence
System to determine the best way to pass
over and clean every section of the floor.
While Scooba is cleaning, it calculates the best
path to clean your floor and it determines th
Instructional videos available at www.irobot.com/usetips Slowly fill the remainder of the Clean
tank with warm or cold tap water. Tilt
the tank and ensure it is completely
filled to the top.
4
Secure the tank cap and place
the tank back in the tank holder.
5
:
s
Open Scooba’s tank.
1
Lift the tank clear of the robot and
place the tank on a flat surface.
2
Close the tank by pressing
down on the tank. You will
hear a click when the tank
is properly install
When Scooba has completed a cleaning cycle,
empty and rinse Scooba’s tanks.
Empty Scooba
5
Remove and clean Scooba's
cleaning head and brush.
6
Replace Scooba’s tank.
Clean With Scooba
With the Clean tank filled and properly installed, place
Scooba in the center of the room, press “Power” and
then press “Clean.” Scooba will begin a cleaning cycle.
Let Scooba clean until the tank is empty (approximately 45
minutes). Scooba’s “Clean” button