Jasco RM24911 Instruction Manual

Universal Remote Control. The RM24911 is one of the most easy to use remote controls available today. With the RM24911, juggling multiple remote controls is a thing of the past! Your RM24911 controls up to three devices, including the most popular brands of TV, VCR, DVD, CBL, and SAT. The RM24911 is easy to use, easy to program, and it gives you total control—at the touch of your fingertips! Note: Some functions from your original remote may not be controlled by this remote. Use the original remote, if available, to control such functions. Sometimes buttons other than described in these instructions m ...

tab and lift the cover off. 2. Match the batteries to the + and - marks inside the battery case, then insert 2 AAA Alkaline batteries. 3. Press the battery cover back into place. Battery Saver Your remote automatically turns off if the buttons are depressed more than 30 seconds. This will save your batteries should your remote get stuck in a place where the buttons remain depressed (e.g., between the sofa cushions). Code Saver You will have up to 10 minutes to change the batteries in your remote without losing codes you have programmed. However, do not press any buttons until batt ...

REW, FF, PAUSE VCR control buttons operate your VCR even when the remote is set to operate the TV. Also operates DVD Scan -/+. Note the VCR buttons also control DVD when in DVD Mode. Some buttons on the remote might have functions that are referred to by different names on the device you are controlling. E.G. PREV.CH may be called RECALL, or ENTER may be called DISPLAY. These differences depend on the brand and model of your product. Also, this remote can only operate features that exist on your product. E.G., your product must have PREV.CH ability for the PREV.CH button to operate this feature. TV, CBL/SAT, DVD/VCR Selects produc ...

level of the product, normally the TV. NUMBERS Enter numbers for direct channel selection. Some products require ENTER to be pressed after channel selection. ON•OFF Turns product On or Off. CHANNEL Up/Down Changes the channels. Button Functions, cont. INPUT For some TVs, press repeatedly to select from available viewing sources (antenna, cable box, VCR, etc.). SETUP Used to setup the remote, and for code search function. SHIFT Press and release to access buttons labeled in reverse print (OK, MENU, EXIT). See “Using SHIFT for Menu and Navigation” description on Page 9 for more information. Note: The REC button m ...

later. Direct Code Entry 1. Press and hold the SETUP button until the red indicator stays on, then release the SETUP button. 2. Press and release the desired device button (TV, VCR, etc.). The red indicator blinks, then stays lit. 3. Enter the 4 digit code from the code tables (on separate sheet). Note: after a valid code entry, the red indicator turns off. For an invalid code, the red indicator flashes. 4. With your device on, press ON•OFF. If the device turns off, no further programming is required. Note: If some buttons do not operate your equipment, try one of the other codes for your brand. ...

tried all the codes for your brand, or if your brand is not listed, try searching for your code by following these steps. 1. Manually turn on the device (TV, VCR, etc.) to be controlled. 2. Press and hold the SETUP button until the red indicator stays on, then release the SETUP button. 3. Press and quickly release the desired device button (TV, VCR, etc.). The red indicator blinks off once. 4. Press the ON•OFF button repeatedly (up to 300 times) until the device to be controlled turns off. The red indicator blinks off with each button press. Most users will store VCR codes under the VCR ...

Code Identification The Code Identification Feature allows you to identify the four digit library code stored under your device button. For example, if you want to find out what four digit code is stored under your TV device button, follow the six steps below: 1. Press and hold the SETUP button until the red indicator stays on. Release the SETUP button. 2. Press and release the desired device button (TV, VCR, etc.). The red indicator blinks, then stays lit. 3. Press and release the SETUP button. The red indicator blinks once and remains lit. 4. To find the first digit for the code stored under the device button pressed in step 2, ...

For MENU, press and release SHIFT/SETUP then MENU/INFO. For OK, press and release SHIFT/SETUP then OK/MUTE. For EXIT, press and release SHIFT/ SETUP then EXIT/SLEEP. For Up, Down, Left or Right Navigation, press and release SHIFT/ SETUP followed by the respective Channel or Volume button. Using SHIFT for Menu and Navigation The SHIFT button allows access to more than one function for certain buttons. Use the SHIFT/SETUP button prior to accessing the MENU, OK, EXIT and Navigation functions e.g.: ...

Sleep Function The Sleep button enables the remote to turn off your TV after a period of 1 to 99 minutes as shown below. The remote must be in TV mode to set a Sleep Timer. This feature works even if your TV does not have a sleep feature. 1. Press and release the TV device but- ton. 2. Press and hold the Sleep button until the onds). 3. Release the Sleep button. 4. Press and release the numeric buttons (01-99) for the time required. The LED will blink off to indicate button press acceptance. 5. TV Sleep Timer is set. 6. Leave the Remote pointing towards the TV with an unobstructed path. To cancel the Sleep Timer, press ...

Controlling Devices with Separate Power On and Off Buttons Some GE, RCA and ProScan models require you to press the device button for more than one second to turn the device on and the ON•OFF button to turn the device off. Controlling Combo Devices Some Combo devices (e.g. TV/VCR, TV/DVD, DVD/VCR, etc.) will require you to set up two different Mode buttons to control both parts of the Combo device. For example, if you have a TV/ DVD Combo, you might need to set up one code under the TV button to control the TV part AND a separate code (under any other Mode button) to control the DVD part. VCR/DVD Punch-Through This remote ...

Through This remote lets you select which device Mode controls your Volume/Mute buttons. The remote is initially set for all device Modes to use their own Volume/Mute control if present. If the programmed code has no Volume/Mute operation of its own then those buttons will punch-through control to the TV Mode device without needing to change to TV Mode. Any Mode chosen for Volume/Mute control MUST have its own Volume/Mute function or the Volume/Mute buttons will do nothing. Setting ALL Volume/Mute Control to any one Mode This routine can set all Modes to “punch-through” to any one chosen Mode for Volume/Mute button ...

This routine can set any Mode to use only its own Volume/Mute control. Note - If your chosen Mode has no Volume/Mute functions of its own then the Volume/Mute buttons will do nothing. 1. Press and hold the SETUP button until the red indicator turns on, then release the button. 2. Press and hold the MUTE button until the red indicator blinks off, then release the button. 3. Press and release the desired Mode button (TV, VCR, etc.), the red indicator blinks then stays on. 4. Press and release the VOLUME- (Down) button, the red indicator blinks then stays on. 5. Press and release the MUTE button and the red indicator turns ...

• Press the device button of the product you want to control. • Program the remote with a new code. • Install new batteries. (You might have to reprogram your remote after installing new batteries.) • Remote may not be compatible with your product. Remote does not operate some features of your product. • Sometimes a particular code might operate some features but not all. Try programing remote with a new code. • Remote may not be able to operate all features of your product or button names might be different than your product. Red Indicator blinks after you program a product code. • R ...

to be free from manufacturing defects for a period of ninety days from the original date of consumer purchase. This warranty is limited to the repair or replacement of this product only and does not extend to consequential or incidental damage to other products that may be used with this unit. This warranty is in lieu of all other warranties express or implied. Some states do not allow limitations on how long an implied warranty lasts or permit the exclusion or limitation of incidental or consequential damages, so the above limitations may not apply to you. This warranty gives you specific rights, and ...

311 N.W. 122nd Oklahoma City, OK 73114 Control Remoto Universal Manual de Instrucciones RM24911 ...

Universal RM24911. El RM24911 es uno de los controles remotos más fáciles de usar disponibles en la actualidad. ¡Con el RM24911, usar varios controles remotos diferentes es cosa del pasado! El RM24911 controla hasta tres aparatos, incluyendo las marcas más populares de televisores, videograbadoras, DVD, cable y satélite. El RM24911 es fácil de usar, fácil de programar y le da a usted control total... ¡con la punta de sus dedos! Nota: Puede que este control remoto no ejecute algunas funciones de su control remoto original. Utilice el control remoto original, si está disponible, para ejecutar tales ...

1. Presione hacia abajo la lengüeta en la parte posterior del control remoto y retire la tapa. 2. Inserte dos baterías alcalinas tamaño AAA de manera que correspondan con las marcas + y – del compartimiento. 3. Ajuste nuevamente la tapa haciendo presión. Ahorrador de baterías El control remoto se apagará automáticamente si algún botón se mantiene oprimido por más de 30 segundos. Esto prolongará la duración de sus baterías en caso de que el control remoto se quede atascado en algún lugar con los botones presionados (por ejemplo, entre los cojines del sofá). Protección de códigos Usted dispondrá de 10 ...

REW, FF, PAUSE Los botones de control de la videograbadora operan su videograbadora aun cuando el control remoto esté programado para operar el televisor. También opera el Scan -/+ del DVD. Note que los botones de la videograbadora también controlan el DVD cuando está en modo DVD. Algunos botones del control remoto podrían tener funciones que corresponden a nombres diferentes en el aparato que está controlando. Por ejemplo, puede que PREV.CH se llame RECALL, o ENTER se llame DIS- PLAY. Tales diferencias dependen de la marca y el mod- elo de su producto. Igualmente, este control remoto sólo puede ejecutar funciones que exis ...

bia el nivel de volumen del producto, normalmente el del televisor. NUMBERS Digite los números para elegir directamente el canal que desea. En algunos productos se debe oprimir ENTER después de escoger el canal. ON-OFF Enciende y apaga el producto. CHANNEL Up/Down Cambia de canal. Funciones de los botones, continuación INPUT En algunos televisores, presione varias veces para seleccionar fuentes de visualización disponibles (antena, cable, videograbadora, etc.). SETUP Se usa para configurar el control remoto y para la función de búsqueda de códigos. SHIFT Presione y suelte para acceder a los botones con nombres en impresió ...