JVC Model GR-AX820 Instructions Manual

INSTRUCTIONS LYT0002-029A Compact VHS For Customer Use: Enter below the Serial Nos. of the GR-AX820U camcorder and the AA- V11U AC Power Adapter/Charger. The serial numbers are located on the bottom of the GR-AX820U, and the AA- V11U. Model No. GR-AX820U AA-V11U Serial No. ...

HAZARD, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. Warning on lithium battery The battery used in this device may present a fire or chemical burn hazard if mistreated. Do not recharge, disassemble, heat above 100°C (212°F) or incinerate. Replace the battery with Panasonic (Matsushita Electric), Sanyo or Maxell CR2025; ...

ventilation. To ensure reliable operation of the product and to protect it from overheating, these openings must not be blocked or covered. • Do not block the openings by placing the product on a bed, sofa, rug or other similar surface. • Do not place the product in a built-in installati ...

•Do not place this product on an unstable cart, stand, tripod, bracket or table. It may fall, causing serious injury to a child or adult, and serious damage to the product. •Use only with a cart, stand, tripod, bracket, or table recommended by the manufacturer or sold with the product. •Use a mounting acce ...

SUPPLY POWER Using the battery pack 1 Hook-on the battery pack’s top end to the camcorder. (Charging procedure, Z pg. 8) 2 Push in the battery pack until it locks into place. To remove the battery pack Slide BATT. RELEASE and pull out the battery pack. PLAYBACK 1 Set the power switch to “PLAY”. 2 Press REW. — The tape will aut ...

The only compact video cassettes that can be used with your VHS VCR* Cassettes marked can be used with this camcorder. Digital Hyper Zoom (Z pg. 15) Zoom-in Zoom-out Random Assemble Editing (Z pg. 37 – 39) 8 8 2 2 5 5 4 4 1 1 6 6 3 3 7 7 PROVIDED ACCESSORIES •DC Cord •AC Power Adap ...

Clock (Lithium) Battery Insertion/Removal........................................ 10 Viewfinder Adjustment ............................................................... 10 Date/Time Setting ............................................. ...

choose the most appropriate source of power. NOTES: ●No function is available without power supply. ●Use only specified power supply. ●Do not use provided power supply units with other equipment. CHARGING THE BATTERY PACK SUPPLY POWER 1 Connect the charger’s AC power cord t ...

the frequency of zooming. It is safer to have spare battery packs. ●Charging times noted on page 8 are for fully discharged battey pack, and discharging times are for fully charged battery pack. ●Charging and discharging times vary according ...

Clock (Lithium) Battery Insertion/Removal This battery is necessary for clock operation and to perform date/time settings. SWITCH OFF POWER 1 Switch off the unit’s power and remove the power supply unit. OPEN COVER 2 Open the clock battery compartment cover while pressing the release tab. REMOVE BATTERY (when replacing) 3 Insert ...