JVC KD-G541 Instructions Manual

INSTRUCTIONS GET0495-003A [EX/EU] For canceling the display demonstration, see page 5. ...

sure to look around carefully or you may be involved in a traffic accident. Information for Users on Disposal of Old Equipment This symbol indicates that the product with this symbol should not be disposed as general household waste at its end-of-life. If you wish to dispose of this product, please do so in accordance with applicable national legislation or other rules in your country and municipality. By disposing of this product correctly, you will help to conserve natural resources and will help prevent potential negative effects on the environment and human health. Caution on volu ...

• Your preset adjustments will also be erased (except the registered Bluetooth device, see page 16). How to forcibly eject a disc “PLEASE” and “EJECT” appear alternately on the display. • Be careful not to drop the disc when it ejects. • If this does not work, reset your unit. How to use the M MODE button If you press M MODE, the unit goes into functions mode, then the number buttons and 5/∞ buttons will work as different function buttons. Ex.: When number button 2 works as MO (monaural) button. To use these buttons for their original functions, press M MODE again. • Waiting for about 5 seconds with ...

4 Source button / Control dial 5 Display window 6 T/P (traffic programme/programme type) button 7 OPEN button • To flip-open the control panel. • To eject the disc, flip-open the control panel then press 0 on the unit. 8 SEL (select) button 9 EQ (equalizer) button p MO (monaural) button q SSM (Strong-station Sequential Memory) button w Number buttons e RPT (repeat) button r RND (random) button t M MODE button y DISP (display) button u BAND button i Remote sensor • You can control this unit with an optionally p ...

indicators—CLASSIC, HIP HOP, JAZZ, ROCK, POPS, USER j EQ (equalizer) indicator k Bluetooth indicator l Disc information indicators— TAG (Tag information), (folder), (track/file) / Playback source indicators— DISC: Lights up for the built-in CD player. CH: Lights up only when CD-CH is selected as the playback source. z RDS indicators—AF, REG, TP, PTY x Main display c Playback mode / item indicators—RND (random), (disc), (folder), RPT (repeat) v Tuner reception indicators—ST (stereo), MO (monaural) Getting started Basic operations ~ Turn on the power. Ÿ FM1/FM2/FM3/AM = DAB1/DAB2/DAB3 * ...

To check the current clock time while the power is turned off Clock time is shown on the display for about 5 seconds. See also page 14. Radio operations ~ Ÿ ! Start searching for a station. When a station is received, searching stops. To stop searching, press the same button again. To tune in to a station manually In step ! on the left column... 1 2 Select a desired station frequency. When an FM stereo broadcast is hard to receive Reception improves, but the stereo effect will be lost. To restore the stereo effect, repeat the same procedure. “MONO OFF” appears and the MO indicator goes off. Storing stations in mem ...

presetting is over. Local FM stations with the strongest signals are searched and stored automatically in the FM band. Manual presetting Ex.: Storing the FM station of 92.50MHz into preset number 4 of the FM1 band. 1 2 3 Listening to a preset station 1 2 Select the preset station (1 – 6) you want. To check the current clock time while listening to an FM (non-RDS) or AM station • For FM RDS stations, see page 9. FM RDS operations What you can do with RDS RDS (Radio Data System) allows FM stations to send an additional signal along with their regular programme signals. By receiving the RD ...

TA Standby Reception TA Standby Reception allows the unit to switch temporarily to Traffic Announcement (TA) from any source other than AM. The volume changes to the preset TA volume level if the current level is lower than the preset level (see page 14). To activate TA Standby Reception The TP (Traffic Programme) indicator either lights up or flashes. • If the TP indicator lights up, TA Standby Reception is activated. • If the TP indicator flashes, TA Standby Reception is not yet activated. (This occurs when you are listening to an FM station without the RDS signals required for TA Standby Reception.) To ac ...

listening to an FM RDS station Station name (PS) = Station Frequency = Programme type (PTY) = Clock = (back to the beginning) PTY codes NEWS, AFFAIRS, INFO, SPORT, EDUCATE, DRAMA, CULTURE, SCIENCE, VARIED, POP M (music), ROCK M (music), EASY M (music), LIGHT M (music), CLASSICS, OTHER M (music), WEATHER, FINANCE, CHILDREN, SOCIAL, RELIGION, PHONE IN, TRAVEL, LEISURE, JAZZ, COUNTRY, NATION M (music), OLDIES, FOLK M (music), DOCUMENT Disc operations Playing a disc in the unit The following marks are used to indicate... : Built-in CD player operations. : External CD changer operations. All tracks will be p ...

All discs in the magazine will be played repeatedly until you change the source. • Ejecting the magazine will also stop playback. ~ * If you have changed the external input setting to “EXT INPUT” (see page 15), you cannot select the CD changer. Ÿ Select a disc. For disc number from 01 – 06: For disc number from 07 – 12: About the CD changer It is recommended to use a JVC MP3-compatible CD changer with your unit. • You can also connect MP3-incompatible CD changers. However, these units are not compatible with MP3 discs. • You cannot use the CH-X99, CH-X100, and KD-MK series CD changers with this ...

While playing an audio CD or CD Text A = B = Disc title/performer *1 = Track title *1 [ ] = (back to the beginning) While playing an MP3 or a WMA track • When “TAG DISPLAY” is set to “TAG ON” (see page 15) A = B = Album name/performer (folder name *2) [ ] = Track title (file name *2) [ ] = (back to the beginning) • When “TAG DISPLAY” is set to “TAG OFF” A = B = Folder name [ ] = File name [ ] = (back to the beginning) A : The elapsed playing time with the current track number B : Clock with the current track number [ ] : Corresponding indicator lights up on the display. *1 If ...

music genre (iEQ: intelligent equalizer). 1 2 Indication (For) BASS MIDDLE TREBLE LOUD USER (Flat sound) 00 00 00 OFF ROCK (Rock or disco music) +03 00 +02 OFF CLASSIC (Classical music) +01 00 +03 OFF POPS (Light music) +02 +01 +02 OFF HIP HOP (Funk or rap music) +04 –02 +01 OFF JAZZ (Jazz music) +03 00 +03 OFF Adjusting the sound You can adjust the sound characteristics to your preference. 1 2 Preset values Selecting the playback modes You can use only one of the following playback modes at a time. 1 2 Select your desired playback mode. 7 Repeat play Mode Plays repeatedl ...

You can change PSM (Preferred Setting Mode) items listed in the table on pages 14 and 15. 1 2 Select a PSM item. 3 Adjust the PSM item selected. 4 Repeat steps 2 and 3 to adjust other PSM items if necessary. 5 Finish the procedure. Indication, [Range] BASS *1, [–06 to +06] Adjust the bass. MIDDLE *1 (mid-range), [–06 to +06] Adjust the mid-range frequencies sound level. TREBLE *1, [–06 to +06] Adjust the treble. FADER *2, [R06 to F06] Adjust the front and rear speaker output balance. BALANCE *3, [L06 to R06] Adjust the left and right speaker output balance. LOUD *4 (loudness), [LOUD ON or LOUD OFF] Boost low an ...

Selectable settings, [reference page] DEMO Display demonstration • DEMO ON • DEMO OFF : The display demonstration will be activated automatically if no operation is done for about 20 seconds, [5]. : Cancels. CLOCK DISP *1 Clock display • CLOCK ON • CLOCK OFF : The clock time is shown on the display at all times when the power is turned off. : Cancels; pressing DISP will show the clock time for about 5 seconds when the power is turned off, [6]. CLOCK HOUR Hour adjustment 0 – 23 (1 – 12) [Initial: 0 (0:00)], [5]. CLOCK MIN Minute adjustment 00 – 59 [Initial: 00 (0:00)], [5]. 24H/12H Time displ ...

Selectable settings, [reference page] DAB AF *4 Alternative frequency reception • AF ON • AF OFF : Traces the programme among DAB services and FM RDS stations, [9, 21]. : Cancels. DIMMER Dimmer • ON • OFF : Dims the display and button illumination. : Cancels. KEY ILLUM Illumination switch • RED • GREEN : You can select the button illumination according to your preference. TEL MUTING Telephone muting • MUTING 1/ MUTING 2 • MUTING OFF : Select either one which mutes the sounds while using a cellular phone. : Cancels. SCROLL *5 Scroll • ONCE • AUTO • OFF : Scrolls the displayed informati ...

devices For Bluetooth operations, it is required to connect the Bluetooth Adapter (KS-BTA200) to the CD changer jack on the rear of this unit. • Refer also to the instructions supplied with the Bluetooth adapter and the Bluetooth device. • Refer to the list (included in the box) to check the countries where you may use the Bluetooth ® function. To use a Bluetooth device through the unit (“BT-PHONE” and “BT-AUDIO”) for the first time, you need to establish Bluetooth wireless connection between the unit and the device. • Once the connection is established, it is registered in the unit even if you reset you ...

connect. On the device to be connected, enter the same PIN code you have just entered for this unit. “CONNECTED” appears on the display. Now connection is established and you can use the device through the unit. The device remains registered even after you disconnect the device. Use “CONNECT“ (or activate “AUTO CNNCT”) to connect the same device from next time on. (See the following and pages 19 and 20.) Connecting a device Perform steps 1 and 2 on page 16, then... 1 • Select “SEARCH” to search for available devices. The unit searches and displays the list of the available devices. ...

The source is automatically changed to “BT-PHONE.” When “AUTO ANSWER” is activated.... The unit answers the incoming calls automatically, see pages 19 and 20. • When “AUTO ANSWER” is deactivated, press any button (except ) to answer the incoming call. • You can adjust the microphone volume level (see pages 19 and 20). To end the call Hold any button (except ). When a text message comes in.... If the cellular phone is compatible with text message (notified through JVC Bluetooth adapter) and “MSG INFO” (message info) is set to “AUTOMATIC” (see pages 19 and 20), the unit rings to inform you of th ...

You can preset up to six phone numbers. 1 Display the Dial Menu. 2 Select “PHONE BOOK *,” “MISSED *,” “REDIAL *,” or “RECEIVED *” whichever you want to use. Then select a phone number. * Displays only when your cellular phone is equipped with these functions and is compatible with this unit. 3 Using the Bluetooth audio player If playback does not start automatically, operate the Bluetooth audio player to start playback. • If playback does not pause when you change the source, operate the Bluetooth audio player to pause playback. Reverse skip/forward skip Pause/start playback * * Operation may be ...

AUTO CNNCT (connect) When the unit is turned on, the connection is established automatically with... OFF : No Bluetooth device. LAST : The last connected Bluetooth device. ORDER : The available registered Bluetooth device found at first. AUTO ANSWER Only for the device being connected for “BT-PHONE.” ON : The unit answers the incoming calls automatically. OFF : The unit does not answer the calls automatically. Answer the calls manually. REJECT : The unit rejects all incoming calls. MSG INFO (message info) Only for the device being connected for “BT-PHONE.” AUTOMATIC : The unit informs you of the arr ...