JVC VN-C20 Instructions Manual
Text of the manual
BOX TYPE NETWORK CAMERA
VN-C20
INSTRUCTIONS
LST0329-001A
For Customer Use:
Enter below the Serial No. which is located
on the body.
Retain this information for future reference.
Model No. VN-C20
Serial No.
Thank you for purchasing this JVC product.
Before operating this unit, please read the
instructions carefully to ensure the best
possible perfor
CAUTION:TO REDUCE THE RISK OF ELECTRIC
SHOCK. DO NOT REMOVE COVER (OR
BACK). NO USER-SERVICEABLE PARTS
INSIDE.REFER
SERVICING
TO
QUALIFIED SERVICE PERSONNEL.
The lightning flash wish arrowhead
symbol, within an equilateral triangle is
intended to alert the user to the pres-
ence of uninsulated "dangerous volt-
age" within th
●This installation should be made by a
qualified service person and should conform
to all local codes.
●This installation shall be in accordance with
the National Electrical Code, ANSI/NFPA 70.
●The unit is to be powered by an AC 24 V
power supply.
The AC 24 V power supply should conform to
the following:Class 2 only(For USA),Isolated
power supply on
These are general IMPORTANT SAFEGUARDS and certain items may not apply to all appliances.
1. Read all of these instructions.
2. Save these instructions for later use.
3. All warnings on the product and in the operating instructions should be adhered to.
4. Unplug this appliance system from the wall outlet before cleaning. Do not use liquid cle
Introduction .................................... 2
Safety Precautions ................................ 2
Main Features ....................................... 6
Operating Environment ......................... 6
Cautionary Notes .................................. 7
Name and Function of Parts ................. 8
Front / Top / Side ..........................
These instructions are for VN-C20U.
High Picture Quality
The camera unit of VN-C20 employs a 380,000-
pixel CCD (1/3") which enables high quality
image monitoring.
Built-in Web Server
Setting is possible using the Internet Explorer.
Support for Multicast
VN-C20 supports multicast, which enables
transmission of an image data to multiple
Maintenance and operating environment
This camera is intended for use indoors.Make sure
to use a housing, etc. when using it outdoors.
Do not store in the following environments.
It might result in malfunctions or failure.
●Hot or cold locations beyond the
surrounding temperature range of -10 f to
50 f.
●Locations beyond the allowable operating
hu
Front / Top / Side
A Back Focus adjustment ring
This ring is used for back focus adjustment and
switching the lens mount method.
To operate, turn the H back focus fastening
screw in the anti-clockwise direction, and turn
the screw in the clockwise direction to fasten
after operation is complete.
This product is pre-adjusted to a position that
Side / Rear
I [RESET] Reset button
This is a button for rebooting the camera. Press
this button and release within 5 seconds to
reboot the camera.
It takes about 1 minute for the camera to
reboot.During startup, [RESET] button is
disabled.
Caution:
Pressing the [RESET] button for 5 seconds or
longer switches the camera to the service
verification mode.
Do