JVC MX-K30 Instructions Manual

Enter below the Model No. and Serial No. which are located either on the rear, bot- tom or side of the cabinet. Retain this information for future reference. Model No. Serial No. LVT0860-001D 44-1074-1 [J] COMPACT COMPONENT SYSTEM MX-K30/MX-K10 Consists of CA-MXK30 and SP-MXK30 Consists of CA-MXK10 and SP-MXK10 BASS-REFLEX BASS-REFLEX CD-R/RW PLAYBACK 3-CD PLAY & EXCHANGE ACTIVE BASS EX. CLOCK /TIMER COMPU PLAY CONTROL ACTIVE BASS EX ...

For U.S.A. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential instal- lation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accord- ance with the instructions, may cause harmful ...

DANGER 1. Invisible laser radiation when open and interlock failed or defeated. Avoid direct exposure to beam. CAUTION 1.Do not open the top cover. There are no user serviceable parts inside the unit; leave all servicing to qualified service personnel. 2.Use of controls, adjustments or performance of proce- dures other than those specified herein may result in haz- ardous radiation exposure. CAUTION To reduce the risk of electric ...

We hope it will be a valued addition to your home, giving you years of enjoyment. Be sure to read this instruction manual carefully before operating your new stereo system. In it you will find all the information you need to set up and use the system. If you have a query that is not answered by the manual, please contact your dealer. Features Here are some of the things that make you ...

Introduction ...................................................................................................................1 Features.................................................................................................................................................... 1 How This Manual Is Organized............................................................................................................... 1 IMPORTANT ...

AM Loop Antenna (1) Remote Control (1) Batteries (2) FM Wire Antenna (1) If any of these items are missing, contact your dealer immediately. How To Put Batteries In the Remote Control Match the polarity (+ and –) on the batteries with the + and – markings in the battery compartment. CAUTION: • Handle batteries properly. ❏To avoid ba ...

Connecting the FM Antenna Using the Supplied Wire Antenna Using an FM 75-Ohm Antenna Cable (not Supplied) If reception is poor, connect the outside antenna. • Before attaching a 75 ohm coaxial lead (the kind with a round wire going to an outdoor antenna), disconnect the supplied FM Wire Antenna. FM wire antenna (supplied) Extend the supplied FM Wire An ...

Rear Panel of the Unit • Even when connecting an outside AM antenna, keep the indoor AM loop connected. CAUTION: • To avoid noise, keep antennas away from the System, the connecting cord and the AC power cord. Connecting the Speakers 1. Open each of the terminals to connect the speaker wire leads. 2. Connect the speaker cords to the Speaker terminals of the Unit. Connect the red (+) and black (–) cords of t ...

Connect a signal cord (not supplied) between the System’s AUX-IN terminals and the output terminals of the external MD recorder, tape deck, etc. You can then listen to the external source through the System. Connecting to the Wall Outlet Plug the AC power cord into the wall outlet. Now, your System is at your command! DEMO Mode When the System is connected to the wall outlet, a DEMO mode displaying some of ...

Turning the System On 1 Press the % STANDBY/ON button. The display comes on and “WELCOME” is displayed once. The STANDBY indicator goes out. The System comes on ready to continue in the mode it was in when the power was last turned off. • For example, if the last thing you were doing was listening to a CD, you are now ready to listen to a CD again. If you wish, you can change to another source. • If ...

You can mute the output with one touch operation. To muting the output, press the FADE MUTING button on the Remote Control. The output is faded out. To release muting, press the FADE MUTING button once again. The output is faded in to the previous level. • After Fade-out Muting, turning the VOLUME control on the unit or pressing the VOLUME button on the Remote Control will increase the volume from MIN. set ...

You can listen to FM and AM stations. Stations can be tuned in manually, automatically, or from preset memory storage. ❏Before listening to the radio: • Make sure that both the FM and AM antennas are correctly connected. (See pages 4 and 5). One Touch Radio Just press the FM/AM button to turn on the System and start play- ing the station you were last tuned to. ❏You can switch from any other sound source to the radio by pressing the ...

• In AM broadcast, reception sensitivity will be changed by turning the AM loop antenna. Turn the AM loop antenna for best reception. Presetting Stations You can preset up to 30 FM stations and up to 15 AM stations. • Preset numbers may have been set to factory test fre- quencies prior to shipment. This is not a malfunction. You can preset the stations you want into memory by following one of the presetting methods below. • During ...

The CD Player has the rotational disc tray that can accommodate 3 CDs. You can use Normal, Program, Random, or Repeat Play. Here are the basic things you need to know to play CDs and locate the different tracks on them. About the Disc Indicator The Disc indicator consists of the following three kinds of indica- tors: CD-R/RW PLAYBACK 3-CD PLAY & EXCHANGE ACTIVE BASS EX. CLOCK /TIMER COMPU PLAY CONTROL ACTIVE BASS EXTENSION EJECT ...

Example of indication: One Touch Play The power comes on, and operations are done automatically. ❏By pressing the CD 6 button, the System will come on, and if a CD is loaded for the disc number that was lastly selected, it will start playing from the first track. ❏By pressing the CD1-CD3 button, the System will come on, and if a CD is already loaded for the selected disc number, it will start play from the first track. To Load CD ...

Basics of Using the CD Player- Normal Play To Play CDs 1 Load CDs. 2 Press one of the Disc button (CD1-CD3) you want to play. The selected disc number (e.g. “CD-1” ) appears on the dis- play. The first track of the selected CD begins playing. When the first CD finishes playing, the next and the third CDs are con- tinuously played back. When the last CD has finished playing, the CD Player auto- matically stops. Examples: CD1 = CD2 ...

Programming the Playing Order of the Tracks You can program the playing order of the tracks on all the CDs. Note that you can only make a program when the CD Player is stopped. ❏You can program up to 32 tracks in any desired order including the same tracks. To Make a Program 1 Load CDs 2 In Stop mode, set the CD Player in Program Play mode. On the Unit Press the PROGRAM button to light the “PRGM” indicator on the display. At th ...

Random Play The tracks of all the CDs will play in no special order when you use this mode. • To use Repeat Play for Random Play, press the REPEAT but- ton to select “ALL” or “1” before starting playback. For details, see “Repeating Tracks”mentioned below. 1 In Stop mode, set the CD Player in Random Play mode. On the Unit Press the RANDOM button to light the “RANDOM” indicator. At the same time, “RANDOM” appears ...

The Cassette Deck allows you to play, record, and dub audio tapes. ❏Listening to type I tape is suitable for this Cassette Deck. The use of tapes longer than 120 minutes is not rec- ommended, since characteristic deterioration may occur and these tapes easily jam in the pinch-rollers and the capstans. One Touch Play By pressing the TAPE 3 button, the System will come on, and if a tape is in the deck, it wi ...

Recording onto a cassette from any of the sound sources is simple. Just place a tape in Deck B, have the source ready, make one or two settings, and you’re ready to record. For each source, the pro- cedure is a little bit different so we explain each separately. But first, here are a few things to make your recordings better. Things To Know Before You Start Recording ❏❏❏❏It should be noted that it may be un ...