JVC HR-J655EA Instructions Manual

INSTRUCTIONS LPT0106-001B PAL NTSC TV PR OG + T V V O L – TV PR OG – T V V O L + VCR CANCEL TIMER START STOP DATE PUSH JOG MENU OK TV PROG TV/VCR (MONITOR) C. RESET DAILY AUX WEEKLY PROG. CHECK PROG. DISPLAY AUDIO 1 2 3 4 5 6 7 8 9 0 2 4 1 3 EXPRESS PROGRAMMING MULTI BRAND REMOTE CONTROL UNIT TV 30 SEC COLOUR SYSTEM SP/ ...

installing or operating the recorder. n It should be noted that it may be unlawful to re-record pre-recorded tapes, records, or discs without the consent of the owner of copyright in the sound or video record- ing, broadcast or cable programme and in any literary, dramatic, ...

listed in “Specifications” (Z pg. 46). SITUATE RECORDER 2 Place the recorder on a stable, horizontal surface. CONNECT RECORDER TO TV 3 The connection method you use depends on the type of TV you have. RF CONNECTION ●To Connect To A TV With NO AV Input Terminal ...

which your TV receives picture and sound signals from the video recorder through the RF cable. If you have connected the video recorder to your TV via the provided RF cable only (RF connection) – Go to "With RF Connection" below. If you have connected the video reco ...

SET VIDEO CHANNEL 3 Set your TV to UHF channel 36. ●If the two vertical white bars appear clearly on the screen as shown in the illustration (Z "TEST SIGNAL" on page 4), press OK and then go to step 4. ●If the two vertical white bars do not appear clearly, press OK and then TV PROG + or – to set the vi ...

Auto Set Up Before starting, make sure of the following: ●The TV aerial cable should be connected to the recorder. ●The recorder's mains power cord should be connected to a mains outlet. Z pg. 3 ●The "Video Channel Set" procedure should be done first and the TV should be set to its AV mode (with ...

PLEASE WAIT START FINISH TV Screen When Auto Set Up is completed, the lowest position number will appear on the front display panel. During Auto Set Up "PLEASE WAIT" blinks on the screen and "Auto" blinks on the front display panel. NOTES: ●If you perform Auto Set Up when the aerial cable is not connected proper ...

TURN THE RECORDER ON 1 Press . ACCESS MAIN MENU SCREEN 2 Press MENU. ACCESS INITIAL SET SCREEN 3 Press PUSH JOG %fi to place the pointer next to "INITIAL SET", then press OK or PUSH JOG . ACCESS CLOCK SET SCREEN 4 Press PUSH JOG %fi to place the pointer next to "CLOCK SET", then p ...

24. 12. 98 ST SIM. ON HIFI L R –1 : 23 : 45 0 + + + + On-Screen Displays You can choose whether or not to have various operational indicators appear on screen, by setting this function ON or OFF. Turn on the TV and select the VIDEO channel (or AV mode). TURN ON THE RECORDER 1 ...

recorder is tape playback. Already-recorded signals on a video tape are read by your video recorder and displayed on your TV just like a TV programme. LOAD A CASSETTE 1 Make sure the window side is up, the rear label side is facing you and the ...