Key Digital KD-VP6 Operating Instructions Manual
Text of the manual
521 East 3rd Street, Mount Vernon, NY 10553
Phone :: 914.667.9700 Fax :: 914.668.8666
Web :: www.keydigital.com
KD-VP6 & VP8 Operating Instructions
Operating Instructions
Key Digital®, led by digital video pioneer Mike Tsinberg,
develops and manufactures high quality, cutting-edge
technology solutions for virtually all applications where
high quality v
KD-VP6 & VP8 Operating Instructions
Page 2
KD-VP6 & VP8 Operating Instructions
Page 1
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with dry cloth.
Do not block any ventilation openings. Install in accordance with the manufacturer’s
instructions.
Do not install
KD-VP6 & VP8 Operating Instructions
Page 2
KD-VP6 & VP8 Operating Instructions
Page 3
abouT kd-vP6 & kd-vP8 vIdeo PRoCeSSoRS
Thank you for purchasing a Spider Series™ Video Processor by Key Digital®.
The successful installation and operation of your Spider Series™ KD-VP video processor with your
entertainment system is very important to us at Key Digita
KD-VP6 & VP8 Operating Instructions
Page 4
KD-VP6 & VP8 Operating Instructions
Page 5
a Typical kd-vP6 interface configuration for input (source) devices
and the output (sink) display, with audio bypass, of your installation.
a Typical kd-vP8 interface configuration for input (source) devices
and the output (sink) display, with audio bypass, of your installa
KD-VP6 & VP8 Operating Instructions
Page 6
KD-VP6 & VP8 Operating Instructions
Page 7
2. Connect your source devices to the input ports of your kd-vP unit.
Connect the Composite (CVBS), S-Video and Component Video sources to the inputs of your VP
unit. (Note: Audio must bypass the VP unit.)
The InPuT connectors accept
Composite, S-Video and/or
Component vide
KD-VP6 & VP8 Operating Instructions
Page 8
KD-VP6 & VP8 Operating Instructions
Page 9
5. be sure the operation mode Switch is set to the “normal” position.
Once you have made all the video connections to your KD-VP, be sure the Operation Mode Switch
located on the side panel of the unit is to the “Normal” position.
The slide switch labeled “operati
KD-VP6 & VP8 Operating Instructions
Page 10
KD-VP6 & VP8 Operating Instructions
Page 11
3a. analog output
Component video is available at the RCA output connectors. The ”Analog Output Control”
pushbutton enables you to toggle between interlaced (SDTV) and progressive (EDTV) output until
you reach the desired format. Your selection will be indicated by t
KD-VP6 & VP8 Operating Instructions
Page 12
KD-VP6 & VP8 Operating Instructions
Page 13
IR RemoTe ConTRol
The functions of the KD-VP can be remotely accessed using the IR remote control supplied with
your unit. The status-monitoring LEDs on the KD-VP will light to indicate the selections you make
with the IR remote control, just like when you use the pushbu