Samsung 610 Quick Start Manual

Specifications

Brand:	Samsung
Category:	Flat Panel TV
Model:	610
File Type:	PDF
File Size:	1.47 Mb
Pages:	7

Download

Download PDF Manual (7 pages)

Read Online

Read the Samsung 610 Quick Start Manual online using the built-in PDF viewer.

Text of the manual

quick start guide

imagine the possibilities Thank you for purchasing this Samsung product. To receive more complete service, please register your product at www.samsung.com/global/register

English - 1

1. Connect an HDMI Cable(Not supplied) between the HDMI IN (1, 2, 3 or 4) jack on the TV and the HDMI jack on the Cable Box/Satellite receiver (Set-Top Box). No additional Audio connection is needed for an HDMI to HDMI connection. N CABLE BOX/SATELLITE RECEIVER (SET-TOP BOX) REAR PANEL TV REAR PANEL TV SIDE PANEL 1 Connections Connecting a Cable Box/Satellite receiver (Set-Top Box) via HDMI Caution ● When connecting an external device, match the colour of the connection terminal to the cable. ● The product colour and shape may vary depending on the model. ● Each Cable Box/Satellite receiver (Set-Top Box) has a different back panel configuration. ● Whenever you connect an external device to your TV, make sure that power on the unit is turned off.

English -

Connecting a Cable Box/Satellite receiver (Set-Top Box) via DVI CABLE BOX/SATELLITE RECEIVER(SET-TOP BOX) REAR PANEL TV REAR PANEL 1 2 1. Connect an HDMI Cable(Not supplied) between the HDMI IN 2 jack on the TV and the HDMI jack on the Cable Box/Satellite receiver (Set-Top Box). 2. Connect Audio Cables(Not supplied) between the DVI IN (HDMI 2) [R-AUDIO-L] jack on the TV and the Cable Box/Satellite receiver (Set-Top Box). When using an HDMI/DVI cable(Not supplied) connection, you must use the HDMI IN2 jack. N

English -

Connecting a Cable Box/Satellite receiver (Set-Top Box) via Component cables TV REAR PANEL CABLE BOX/SATELLITE RECEIVER (SET-TOP BOX) REAR PANEL 1 2 1. Connect a Component Cable(Not supplied) between the COMPONENT IN (1 or 2) [Y, PB, PR ] jacks on the TV and the COMPONENT jacks on the Cable Box/Satellite receiver (Set-Top Box). 2. Connect Audio Cables(Not supplied) between the COMPONENT IN (1 or 2) [R-AUDIO-L] jacks on the TV and the AUDIO OUT jacks on the Cable Box/Satellite receiver (Set-Top Box).

English -

Memorizing the Channels Your TV can memorize and store all of the available channels for both “off-air” (Air) and “Cable” channels. After the available channels are memorized, use the CH or CH button to scan through the channels. This eliminates the need to change channels by entering the channel digits. There are three steps for memorizing channels: selecting a broadcast source, memorizing the channels (automatic) and adding or deleting channels (Channel Manager). Selecting the Video Signal-source Before your television can begin memorizing the available channels, you must specify the type of signal source that is connected to the TV (i.e. an Air or a Cable system). 1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select "Channel", then press the ENTER button. 2. Press the ENTER button. Repeatedly press the ▲ or ▼ button to cycle through these choices: “Air”, “STD”, “HRC”, or “IRC” (all cable TV) Press the ENTER button to select. STD, HRC and IRC identify various types of cable TV systems. Contact your local cable company to identify the type of cable system that exists in your particular area. At this point, the signal source has been selected Storing Channels in Memory (Automatic Method) 1. First, select the correct signal source (Air, STD, HRC, or IRC). 2. Press the ▲ or ▼ button to select “Auto Program”, then press the ENTER button. 3. Press the ENTER button to select “Start”. The TV will begin memorizing all of the available channels. The TV automatically cycles through all of the available channels and stores them in memory. This takes about one to two minutes. Press the ENTER button at any time to interrupt the memorization process and return to the “Channel” menu. 4. After all the available channels are stored, the “Channel” menu reappears. Press the EXIT button to exit. To stop the search before it has finished, press the ENTER button with “Stop” selected. N N N Channel Air / Cable : Air  Auto Program  Channel Manager  Fine Tune  Color System : Auto  Move Enter Return TV Channel Air / Cable : Air  Auto Program  Channel Manager  Fine Tune  Color System : Auto  Move Enter Return TV

English - 5

Troubleshooting My TV is out of order. Why? Try this. TV HD is displayed, but the visual quality is not good. • The visual quality may be degraded when the broadcasting stations convert the analog signal to digital. (Although you are watching digital broadcasting, the video source is analog.) • Check the transmitting signal of the corresponding cable TV network or broadcasting station. The picture on the TV screen is broken intermittently (a mosaic or distorted). • This may occur when the broadcast signal received by the TV is too weak or unstable. • Check the transmitting signal of the corresponding cable TV network or broadcasting station. • If you are using a publically shared antenna, check the signal by asking your apartment manager. I cannot control the TV using the remote control. • When the battery is flat. • When it is not in TV mode. • When the remote control malfunctions temporarily. • Replace the battery and then retry. • Press the TV button on the remote control to select TV mode. A strange sound is generated by the TV. • Sound may be generated by the temporary swelling and shrinking of the plastics in the TV due to temperature and humidity changes. • Temporary electronic oscillation sounds may be generated due to the characteristics of the TV • Some noise can be heard due to the characteristics of the product.