Knoll MA850 Installation Instructions
Text of Knoll MA850 Installation Instructions
Knoll Systems warrants MA850 amplifiers sold in the USA and Canada by
authorized Knoll dealers to be free of defects in materials and workmanship. This
warranty extends for three full years from the date of purchase by the original
consumer. Any products returned to Knoll Systems and found to be defective by
Knoll Systems within the warranty period will be repaired or replaced at Knoll
Systems decision, at no charge. Knoll Systems
Important Safety Instructions:
Hum and noise
In most cases, one of the following suggestions should help you
solve a hum noise in your system. Please try these steps in the
order shown, proceeding from one step to the next if the prior
suggestion does not eliminate the problem.
1) Read these instructions.
2) Keep these instructions.
3) Read all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
Sugg
Knoll Systems service information
Installation
Installing the MA850 should be relatively easy. With a bit of
planning, the MA850 will give trouble free service for years.
The MA850 amplifier does not contain any user serviceable parts inside.
If you suspect a problem that may require servicing, contact us at
www.knollsystems.com/contact.html, or by phone at 800 566-5579.
1. The most important consideration when installing the
MA850 is cooling. The MA850 ha
Link (out position)
cascades channel 1
to chanels 2-4
MA850
10. Connect the AC power into an outlet than can supply at
least four amps (550 watts) dedicated to each MA850.
Caution: Never listen to sound that is distorted. If distorted
sound is heard, turn the volume down immediately or speaker
and/or amplifier damage could occur