Konica Minolta 2060 Software Manual

Printer installation on Vista is not that much different than with other versions of Windows, but there is enough of a difference that detailed instructions and screen shots are needed, especially for those who don’t have Vista installed on their computer. Installation steps vary depending on the type of printer you are installing. Installing a Postscript printer is easier than installing a raster or GDI printer. Drive ...

3. Click “Add a local printer” (fig. D) 4. Select “Create a new port” and choose “Standard TCP/IP Port” for the “Type of port” (fig. E). Click Next. 5. Change “Device type” to “TCP/IP Device” and type the IP address of the printer into the “Hostname or IP address” field (fig. F). Don’t check the “Query the printer...” check box. Click Next. C. D. E. ...

For raster or GDI printers, leave it set to “Standard” with “Generic Network Card” and click Next (fig. G). For Postscript printers, including those already built into Vista, select “Custom” and click the “Settings” button (fig. H). In the “Port Settings” window (fig. I), select LPR. Under “LPR Settings” the “Queue Name” should be “x ...

If your printer is one of those listed as bundled with Vista, find the correct company name (Konica Minolta, Mi- nolta-QMS, or QMS) in the “Manufacturer” list, then select the correct printer model in the “Printers” list and click Next. If you downloaded the driver for your printer model, click on the “Have Disk” button in the right corner. Click the “Brow ...

and click Next.** Choose a name for your printer and click Next. Decide whether you want to share the printer or not and choose the appropriate answer, then click Next. If you installed a raster or GDI printer, do not click the “Print Test Page” button at this point; just click Finish. If you installed a Postscript printer, or one of t ...

software” (fig. R). 3. Click the “Browse...” button (fig. S) and the “Browse For Folder” window will open. Find the location (folder) you extracted the driver files to and click on it to highlight it. Click “OK,” then click Next. P. O. Q. R. S. ...

“The software for this device has been successfully installed” (fig. T). **NOTE: If an error occurs during installation (fig. U) skip to Step 7.** 5. For Postscript printers, or those bundled with Vista, installation is complete. For raster or GDI printers, right-click on the icon for your printer in the Printers control panel and sele ...

ties (fig. X). In the next window, click the Device Manager link under Tasks on the left side (fig. Y). c. Expand the “Universal Serial Bus controllers” tree by clicking the “+” next to it. d. Right-click on each of the “USB Root Hub” entries and select “Uninstall” (fig. Z). **NOTE: If you are using a USB mouse, you will want to ...

- Follow steps a-d of ALTERNATE INSTALL 1 a. Restart the PC b. Go to the location on your computer where you extracted the driver files, and double-click on the Setup program to launch the automatic installer. Run the printer installation to it’s completion. When prompted to choose a port during installation, select “FILE.” c. After the Setup program has finished, reconnect the printer to the computer and repeat steps 1-6. Un ...

DD). d. Click on the “Location” pop-up menu and select “Choose search locations...” and the “Choose Search Locations” window opens (fig. EE). Click on the arrows next to the following: Computer - Local Disk (C:) (or whatever the drive Vista is installed on is named) - Windows. Next, click on the checkbox next to “inf” (fig. FF) ...

h. Once the search is finished you should see at least one file name that starts with “oem” followed by a number (fig. JJ). The number is irrelevant and can be anything. Right-click on the file and select “Delete.” If there are multiple “oem” files delete them all. 3. Restart the PC. Uninstall is complete. Uninstall a Raster/GDI Printer Installed via the Network ...

application (fig. LL), and follow the onscreen instructions. 5. Restart the PC. Uninstall is complete. Uninstall a Raster/GDI Printer Installed via Plug-and-Play (USB/parallel) 1. Follow steps 1-4 ONLY in the Uninstall a Raster/GDI Printer Installed via the Network section above, but DO NOT RESTART THE PC at this point, if prompted. 2. Delete the P ...

ties there (fig. MM). Click the “Print Test Page” button in the General tab and see if the printer prints. If you prefer, UAC may be disabled by doing the following (you will be required to enter an administrator password at some point(s) during these steps): 1. Click on “User Accounts and Family Safety” in Control Panels (fig. NN), the ...