Korg D1200 Easy Start Manual

• 16 channel, 4 bus digital mixer • 12 track recorder, with 96 virtual tracks • 4-track simultaneous recording • Hi, Lo and adjustable Mid frequency EQ for every channel • New Modeling mode provides accurate Guitar and Bass effect and amp simulations, plus Mic models – all instant top panel accessible and programmable • Up to 11 simultaneous effects per song: 8 Inserts, 2 Masters and a Final effect. • 100 Scenes, 100 Mark points, 4 Locate points per song • Pro-level editing of song and track data including copy, insert, normalize, exp/compression, 99 levels of UNDO and much m ...

MODELING - This mode allows you to quickly select and edit REMS guitar, bass, and mic modeling effects for recording. By pressing the [MODELING] key, using the CURSOR keys to select a Model type (Guitar, Bass or Mic), then pressing [ENTER], Tracks 1& 2 are automatically set to record status. Now the three realtime control knobs below the display can be used to select and adjust the model settings, such as distortion type, tone, cabinet or mic type. Pressing the [ENTER] or [YES/OK] keys allow you to select additional edit parameters. And the last edits made in modeling mode are ...

and MMC settings, data backup and restore functions, and Disk utilities such as formatting the internal 40GB hard drive. Also included is access to USB mode for connection and data transfer / backup with an external computer. TRACK - In this mode you can access the Virtual Tracks settings, perform track-editing functions (copy, reverse, normalize, etc.) and also import and export single or multiple track audio data in WAV format. SONG - In song mode you can select songs, copy, move, delete and protect songs a ...

• To select the display “tabs” in each mode, use the [<-TAB->] keys or repeatedly press a mode key: [INPUT/OUTPUT/SOLO], [INSERT EFFECT] etc. The [<-TAB->] keys also function as [NO/CANCEL] and [YES/OK] keys. • To move to different locations in the display, use any of the four CURSOR keys. To confirm a highlighted selection in the display, press the [ENTER] key. To change a highlighted value, rotate the DIAL. The Transport keys [�] = RECORD [�] = PLAY [�] = STOP [�] = REWIND [�] = FAST FORWARD Getting Started: Listening to the demo songs 1. After connecting the AC p ...

7. Press the REC [�] key to enter standby record mode, and then press the PLAY [�] key, and begin recording � when finished, press the STOP [�] key and reset the song to the beginning � Play-enable tracks 1 and 2 by pressing the track status keys until they light green � Press [�] to playback the song, and press [�] to stop playback. ! If you want to keep the demo song intact, copy the song to a new song location, using the “CopySong” function in Song mode – “EditSong” tab, or make a backup of the factory demo data to CD or via USB connection. Then keep the original demo son ...

1. Press the [EQ] key, and use the [<-TAB->] keys to move to the desired group of tracks to EQ. 2. Use the CURSOR keys and DIAL to select the “knob” in the display, and edit the value for the EQ parameter for a specific track. The upper left hand side of the display will show the parameter and track you will be working with. Using the Insert Effects 1. Press the [INSERT EFFECT] key � Select the “InsAss” tab using the [<-TAB->] keys and then select the “�” popup button in the display to the right of “Assign” using the CURSOR and [ENTER] keys. 2. To assign an insert effect to a recorded ...

1. Press the [SCENE] key to enter Scene mode. If you have not stored any Scene memory locations yet, press the [STORE] key and then press the [SCENE] key. This will store a “snapshot” of your mixer settings for this song at the COUNTER location indicated on the SONG page. 2. After pressing the [SCENE] key, to enable Scene Memory, select SceneRead:Off in the display using the CURSOR and [ENTER] keys to set the display to read SceneRead:On. 3. To store additional scenes, start song playback and change mixer settings, then press the [STORE] key, followed by pressing the [SCENE] key again. Each time you do this, a n ...

1. 2. 3. 4. 5. 6. Press the [BOUNCE] key. On the “RecMode” tab select Bounce using the CURSOR keys and press [ENTER]. On the “Bounce” tab, select 12Tr->2Tr using the CURSOR keys and press [ENTER]. CURSOR down to RecordVirtualTrack and select virtual track “h” (or any Virtual track that has not been used) by using the DIAL. Set tracks 11-12 to record ready mode by pressing the [TRACK SELECT KEY] for track 11/12 two times (Tracks 11/12 LED should now be red). Now your ready to mixdown to tracks 11-12, virtual track “h” (or the Virtual track you’ve selected). Press the [METER/TRACK VIEW] key. Press PLA ...