Kramer TP-9 Operation & User’s Manual

Preliminary USER MANUAL Model: TP-9, Audio/Video Line Transmitter TP-10, Audio/Video Line Receiver ...

4 3.2 Shielded Twisted Pair (STP)/Unshielded Twisted Pair (UTP) 4 4 Your Audio/Video Line Transmitter and Line Receiver 5 4.1 Your TP-9 Audio/Video Line Transmitter 5 4.2 Your TP-10 Audio/Video Line Receiver 7 5 Connecting an Audio/Vide ...

providing a world of unique, creative, and affordable solutions to the vast range of problems that confront the video, audio, presentation, and broadcasting professional on a daily basis. In recent years, we have redesigned and upgraded most of our line, maki ...

Getting Started 2 2.1 Quick Start This quick start chart summarizes the basic setup and operation: Step Step 2: Connect the power : Connect the power 2 Adjust the EQ. and LEVEL trimmers on the TP-10 if required, by inserting a screwdriver into the small hole and rotating it carefully Adjust the EQ. and LEVEL trimmers on th ...

Line Receiver constitutes an Audio/Video Line transmitter/receiver system. The TP-9 accepts the audio and video input signals, encodes and sends them to the CAT 5 cable. The TP-10 receives the CAT 5 signal, which includes both audio and video, decodes and distributes ...

Overview 4 3.1 About the Power Connect Feature The Power Connect feature applies as long as the cable can carry power. This feature is available when using STP cable and the distance does not exceed 50m on standard CAT 5 cable. For longer distances, heavy gauge cable should be used1. For units which are connected via RJ-45 ...

5 4 Your Audio/Video Line Transmitter and Line Receiver This section describes the: • TP-9 Audio/Video Line Transmitter, see section 4.1 • TP-10 Audio/Video Line Receiver, see section 4.2 4.1 Your TP-9 Audio/Video Line Transmitter Figure 1 and Table 1 define the TP-9 unit: Figure 1: TP-9 Audio/Video L ...

Your Audio/Video Line Transmitter and Line Receiver 6 Figure 2 and Table 2 define the switches on the underside of the TP-9: Figure 2: TP-9 Audio/Video Line Transmitter Underside Table 2: TP-9 Audio/Video Line Transmitter Underside Features # Feature Function 1 VIDEO Input Selector Switch CV Set to CV to transmit composite ...

7 4.2 Your TP-10 Audio/Video Line Receiver Figure 3 and Table 3 define the TP-10 unit: Figure 3: TP-10 Audio/Video Line Receiver Table 3: Features and Functions of the TP-10 # Feature Function 1 CV OUT BNC Connector Connects to the composite video acceptor 2 Y/C OUT 4-pin Connector Connects to the s-Video a ...

Connecting an Audio/Video Distribution System 8 5 Connecting an Audio/Video Distribution System To configure a TP-9/TP-10 audio/video distribution system (for example, for high quality home cinema system), as Figure 5 illustrates, do the following: 1. On the TP-9 connect: � A composite video source (for example, a video ...