Kyocera C5020N - FS Color LED Printer Manual 

2 Table of Contents Introduction........................................................................................................................ 3 Chapter 1 Overview of the Accounting System............................................................ 4 Chapter 2 Setting Up the Accounting System........................ ...

Introduction 3 Introduction With the increasing popularity of office networks, it has become very common for multiple users to share a single printer or multi-function product. This has made it much easier for users to obtain printouts, but they then faced the problem of increasingly large amounts of printouts. To offset this ...

Accounts or users that may use the printer can be limited by registering account codes in advance. The amount of paper used by each registered account code can be tracked, so it is easy to manage separately billing and the amount of paper used by each account. An account code must first be registered to the print ...

Chapter 2 Setting Up the Accounting System 5 Chapter 2 Setting Up the Accounting System This chapter describes the accounting system menus and how to set them up. There are two ways to set up the accounting system. • Enter settings through the printer operator panel • Enter settings by inputting the PRESCRIBE commands Mos ...

The accounting system has the following menus. Account Management ON/OFF Account Management must be set to On in order to use the accounting system. Add Account Adds a new account code that is permitted to use the printer. Delete Account Deletes a previously registered account code. Change Admin. ID Changes the administration ID ...

Chapter 2 Setting Up the Accounting System 7 The following diagram illustrates the accounting system menu structure. Menu structure AdministrationID 012345678912345 Account > Management On >Select Account> 12345678 >>Counter 01234567 >>Max. No. of Copy None >Add Account >Delete Account 12345678 >Chang ...

This section describes how to enter accounting system settings through the printer operator panel. Basic operations are the same as those for the printer mode menu. Set Account Management ON/OFF Turns Account Management ON/OFF. At least 1 Account must exist before turning ON. 1 Make sure Ready is di ...

Chapter 2 Setting Up the Accounting System 9 7 Press [ENTER] again. ? blinks on the operator panel. 8 Press [ ] or [ ] to change the setting to On, then press [ENTER]. Account Management is now set to On. 9 Press [MENU]. Ready is displayed again on the operator panel. • If Sleeping (sleep mode) appears on the operator panel ...

3 Press [ ] or [ ] to display Add Account. 4 Press [ENTER]. The cursor blinks on the operator panel. 5 Press [ ] or [ ] to enter a number (0 through 9). 6 Press [ ]. The number is entered and the cursor auto moves to the next right position. Repeat step 5 and this step at each position to enter th ...