LaCie D2 Quick Install Manual

Quick Install Guide Design by Neil Poulton QIG_d2-Next_Quadra_071126.indd 1 11/26/07 11:53:20 AM ...

Box Content LaCie d2 Quadra Hard Disk Power supply kit FireWire 800 cable FireWire 400 cable Hi-Speed USB 2.0 cable eSATA cable Quick Install Guide Vertical stand kit LaCie Storage Utilities and User Manual are pre-loaded on the drive. QIG_d2-Next_Quadra_071126.indd 2 ...

with Activity LED 2. Removable stand Rear View 3. Power switch 4. FireWire 400 port 5. FireWire 800 ports 6. USB 2.0 port 7. eSATA port 8. Power adapter connection 9. Chain lock option 1 3 6 5 7 8 4 9 2 QIG_d2-Next_Quadra_071126.indd 3 11/26/07 11:53:22 AM ...

2. Connect the USB, FireWire or eSATA cable to your computer and to the drive. 3. Turn on the drive by moving the power switch to On or Auto (drive powers on/ hibernates automatically). The drive will mount in My Computer (Windows) or on your desktop (Mac). 4. Before using your drive, LaCie Setup Assistant softwar ...

Windows users: Double-click the LaCie drive icon in My Computer. Mac users: Double-click the “LaCie Setup Assistant” icon on your desktop. NOTE: If you do not launch LaCie Setup Assistant or if you quit LaCie Setup Assistant after the formatting has begun, your drive will not be ready to use and will require manual format ...

We, LaCie, solemnly declare that this product conforms to the follow- ing European standards: Class B EN60950, EN55022, EN55024 With reference to the following conditions: 73/23/EEC Low Voltage Directive; 89/336/EEC EMC Directive LaCie Hard Disk Tested to comply with FCC standards for home or office use Preca ...

2. Connectez le câble USB, FireWire ou eSATA à votre ordinateur et au disque. 3. Mettez le disque sous tension en plaçant l'interrupteur en position Marche ou Auto (le disque se met sous tension/en veille automatiquement). Le disque apparaît alors dans le dossier Poste de travail (Windows) sur votr ...

1. Collegare l'unità all'alimentazione elettrica. 2. Collegare il cavo USB, FireWire o eSATA al computer e all'unità. 3. Accendere l'unità spostando l'interruttore di accensione in posizione On o Auto (l'unità è progettata per accendersi e attivare automaticamente la modalità di sospensione). L'unità viene visualizzata in ...

1. Schließen Sie das Netzteil an. 2. Schließen Sie das USB-, FireWire- oder eSATA-Kabel an Ihren Computer und an das Laufwerk an. 3. Schalten Sie das Laufwerk ein, indem Sie den Netzschalter auf „On“ [Ein] oder „Auto“ [automatisches Ein-/Ausschalten] stellen. Das Laufwerk wird unter „Arbeitsplatz“ (Windows) o ...

1. Conectar la fuente de alimentación. 2. Conecte el cable USB, FireWire o eSATA al ordenador y a la unidad. 3. Encienda la unidad moviendo el interruptor de alimentación a la posición On o Auto (la unidad se enciende/hiberna automáticamente). La unidad aparecerá en Mi PC (Windows) o en el escritorio (Mac). 4. Antes de usar ...