LENCO DVT-2622 Operation & User’s Manual

PRECAUTONS…………………………………………………………………………………… E3 CONTROLS ……………………………………………………………………………………… E4 USING THE TV FOR THE FIRST TIME ……………………………………………………… E7 BASIC OPERATIONS…………………………………………………………………………… E8 OSD MENU SETTING …………………………………………………………………………… E9 BULID-IN DVD PLAYER OPERATIONS …………………………………………………… E17 ...

present. Before connecting parts and power, please carefully read the user manual and always keep these instructions handy and close by your LCD TV. Remote control X 1 Batteries X 2 Instruction Manual X 1 Please check the accessories when open the package. If anything damaged or lacked, consult with your local dealer . Note: This handling description is printed prior to product development. When a part of the product specifi cation must be changed to improve operability or other functions, priority is given ...

OF THE PRODUCT. REFER ALL SERVICING TO QUALIFIED PERSONNEL. TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE. CAUTION: TO PREVENT THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN This symbol indicates that dangerous voltage constituting a risk of electric shock is present within this unit. This symbol indicates that there are important operating and maintenance instructions ...

1 2 4 9 10 Volume increase button ( + VOL) Volume decrease button (VOL - ) Channel up button � ( oCH) Channel down button ( CH p ) Menu button (MENU) Input source select button ��SOURCE) Power/Standby button ���������(z) Power indicator Remote sensor 1. 2. 3. 4. 5. 6. 7. 8. 9. General control buttons Antenna/Cable TV input plug ���RF 75 ) SCART input plug��SCART1/2) Composite audio & video input plug ��R/L/VIDEO) Component video input plugs ��R/L/Y Pb Pr) S-video input plug (S-VIDEO) � PC audio input plug��PC�AUDIO ) VGA interface input plug� ...

Always remove batteries if the remote control is not to be used for more than a month. Batteries left in it may cause damage. The buttons on the remote control perform similar function to similarly marked buttons on the main unit. • • • Two “LR03/AAA” batteries Inserting Batteries Control Range Control buttons 2 1 3 4 5 7 9 10 11 16 * 17 8 12 18 30 30 Within approx. 8 metres -/- - MUTE DVD SETUP LCD MENU PIP/POP PIPSIZE GOTO SLOW REPEAT ...

teletext page at the same time. If you want to exit teletext state, press this button again. SUBPAGE: It is refer to the subpage of teletext page, i.e subcode page. When it is pressed, the screen display the requirement of subpage code entry. If there is no subpage, it will not be displayed. In most case, there is no subpage. HOLD: Press this button if you want to keep the displaying of the page and press it again to exit hold state. SIZE: Press this button if you want to enlarge the content on the upper part o ...

Turn on the TV unit. The Installing Guide screen appears as below: 1. 2. 3. USING THE TV FOR THE FIRST TIME Press [o] or [p] to select the desired settings. Press [b] or [a] to adjust the desired settings. OSD Language: Press [b] or [a] to select language. The original language of this TV is English. Region Selection: Press [b] or [a] to select. Auto Search: Press [o] or [p] to select it, then press [ENTER] to start auto search. 4. 5. TV information Press [INFO] to diaplay the program information. Program number Sound mode Sound system / Color system Note: When the "reset" operation has been done, and the ...

source item. 2. Press [ENTER] ( or [a] )to confirm. Make sure all necessary connections are correctly connected before turn on the power. The power indicator turns red and the unit is in the standby mode. Turn on the power Press [z] to turn on the main unit. The power indicator turns blue. Turn off the power Press [z] again can turn off the main unit. The unit is automatically set standby mode. The power indicator turns red. Using the Sleep Timer The sleep timer automatically switches off the power after a preset time has elapsed. There are 5 time periods available, press [SLEEP] on the remote ...

Navigating through menus Press [LCD MENU], OSD main menu appears. Press [p], the main menu displays sequentially: Video v Audio v Misc v TV v Geometric v … When some menu option is gray displayed, that means the option is not available in current setting mode. Structure of OSD menu: Audio Sound Mode Bass Treble Balance TV Region Selection Auto Search Manual Scan Common procedure of operation: For each menu, press [o, p] on the remote control to select the options of the main menu. Press [b, a] on the remote control to change or confi rm your settings. (Follow the tips at the bottom of the related OSD screens.) After setting o ...

TV Mode Video menu Press [LCD MENU] to display the main menu. Press [p/o] to select "Video" in the main menu, then press [a] or [ENTER] to enter. Picture Mode: Press [p/o] to select "Picture Mode", then press [b/a] to select. (Available Picture Mode: User, Cinema, Standard, Vivid, Hi-Bright). You can change the value of contrast, brightness, saturation, sharpness and color temperature when the picture is in USER mode. TIPS: You can press [P.STD ]� on the remote control to change the Picture Mode directly. Contrast: Set the picture’s contrast. Brightness: Set the picture’s brightness. Saturation: Set the picture’s saturation. Hue ...

Language", then press [b/a] to select. Blue Mute: Set to “On”, blue screen displays; set to “Off”, blue screen disappears. Picture Size: Press [p/o] to select "Picture Size", then press [b/a] to select Full, Zoom, 4:3, 16:9, Auto. SCART 1: Press [p/o] to select "SCART 1", then press [b/ a] to select. (Available SCART: Auto, CVBS/RGB, CVBS, RGB). SCART 2: Press [p/o] to select "SCART 2", then press [b/a] to select. (Available SCART: Auto, CVBS, S-video). Timer: Press [p/o] to select "Timer", then press [ENTER] to enter. /ENTER MENU Video Audio TV Geometric Misc Select Back Adjust Time Start ...

then press [b/a] to select different regions. Auto Search: Press [p/o] to select "Auto Search", then press [ENTER] to start auto search. Searching 170.37MHz 1 15% MENU EXIT Stop Exit Manual Scan: Press [p/o] to select "Manual Scan", then press [ENTER] to enter sub-menu. FER Manual�Scan Start From Start Search 45.00MHz /ENTER MENU Select Back Adjust PR�Start � PR Start: Press [p/o] to select "PR Start", then press [b/a] to select start search channels. Start From: Press [p/o] to select "Start From", then press [b/a] to select start search frequency. Start Search: Press [p/o] to select ...

Press [p/o] to select "Video" in the main menu, then press [a] or [ENTER] to enter. Notes: Video menu has not Saturation, Hue, Sharpness and Advance Picture Adjust option, other menu and descriptions are the same as that for TV Mode. 1. Audio menu and descriptions are the same as that for TV mode. 2. Misc menu and descriptions are the same as that for TV mode. 3. VGA channel has not TV menu. VGA Mode Geometric menu Press [LCD MENU] to display the main menu. Press [p/o] to select "Geometric" in the main menu, then press [a] or [ENTER] to enter. 24 128 135 32 Auto Setting: Adjust bellow items auto ...

Parameter Mode type Supportive suffi x MPEG-1 .DAT/.MPG/.VOB MPEG-2 .DAT/.MPG/.VOB MPEG-4 .DAT/.MPG/.MP4 Music MP3/WMA Photo JPEG Text TXT text Directory/Music Player Mode Enter the multimedia menu, and select Music player mode. Press [ENTER] to open it. ROOT: Return back to the parent directory. There is no action if the current contents is root. l/ENTER: Play the current fi le/enter to current folder. l/n: Pause/stop the current playing music. f/e: Play the previous song/the next song of currently playing music. Go to previous/next page of current directory when there is no music playing. d: Set the fas ...

playing state. l: Suspend the picture to refresh and maintain the current image display. p/o: Show the current picture rotation. b/a: Show the current picture rotation. n: Enter the picture in the state of browser. ROOT: Stop picture playing, return to the directory mode. INFO: Switch the status bar tips. f/e: Repeat the current approach to play the former/after a current list of picture fi le. d/c: Switch interval time of the picture replacement (5 seconds/10 seconds/20 seconds). REPEAT/SOURCE: The function is the same as directory/ music player mode. : Switch the way to enter when the picture i ...

VGA HDMI 1 HDMI 2 TV X X X X X O O O O AV X X X X X O O O O SVIDEO X X X X X O O O O SCART 1 X X X X X X X O O SCART 2 X X X X X X X O O YPBPR O O O X X X X O O VGA O O O X X X X O O HDMI 1 O O O O O O O X X HDMI 2 O O O O O O O X X O: Available X�Not�Available PIP/POP source confi guration ...

The following types of discs can be played on this unit. Disc type and logo mark DVD CD Region Number Region number (Regional restriction code) is built- in to the unit and DVD video discs.Region number “2” of DVD video discs can be used on this unit. DVD Video Disc DVD video discs are divided into titles, and the titles are sub- divided into chapters. Chapter 1 Chapter 2 Chapter 1 Chapter 2 Chapter 3 There are the marks on some DVD video disc package. Examples: Audio CD Disc Audio CD discs are divided into tracks. Track 1 Track 2 Track 3 Track 4 Track 5 TM Only the above types of discs can be played on this unit. ...

1. Press [A-B] during playback at the beginning of the section you want to repeat (Point A). •“ A” appears on the TV screen. 2. Press [A-B] again at the end of the section you want to repeat (Point B). •“ AB” appears briefl y on the TV screen. 3. To return to normal playback, press [A-B] again. Selecting Subtitle Language [DVD] Press [SUBTITLE] repeatedly during playback until the desired subtitle language appears on the TV screen. Example: SUBTITLE 01/03 ENG Note: Not all disc supports this function. Selecting Audio Soundtrack Language(Multi-Language) [DVD] This operation wor ...

To start the slide show from the thumbnail pictures: 1.Press [o], [a], [p] or [b] to select the desired picture. • To go to the next or previous thumbnail pictures, press[e] or [f]. 2. Press [OK] or [a] (Play) to start the slide show from the selected picture. During the slide show: •Press [k] to pause. Press [a] (Play) to continue. •Press [e] or [f], it skips to the next or previous fi le. •If the picture appears upside down or sideways, press [o], [a], [p] or [b] to fl ip / rotate the picture. Initial settings Once the initial settings have been completed, the unit canalways be operated under the same cond ...