Teledyne 3010TB Operating Instructions Manual

Text of Teledyne 3010TB Operating Instructions Manual

Trace Oxygen Analyzer

Teledyne Analytical Instruments OPERATING INSTRUCTIONS Model 3010TB Trace Oxygen Analyzer Bulkhead Mount Control Unit, PN D-66190A* NEC Type Analysis Unit, PN D-65478* HIGHLY TOXIC AND OR FLAMMABLE LIQUIDS OR GASES MAY BE PRESENT IN THIS MONITORING SYSTEM. PERSONAL PROTECTIVE EQUIPMENT MAY BE REQUIRED WHEN SERVICING THIS SYSTEM. HAZARDOUS VOLTAGES EXIST ON CERTAIN COMPONENTS INTERNALLY WHICH MAY PERSIST FOR A TIME EVEN AFTER THE PO

Teledyne Analytical Instruments

Copyright © 1999 Teledyne Analytical Instruments All Rights Reserved. No part of this manual may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any other language or computer language in whole or in part, in any form or by any means, whether it be electronic, mechanical, magnetic, optical, manual, or otherwise, without the prior written consent of Teledyne Analytica
Trace Oxygen Analyzer Teledyne Analytical Instruments Table of Contents Specific Model Information ................................. iv Preface ................................................................ v Part I: Control Unit, Model TB ...............Part I: 1-1 Part II: Analysis Unit, Model T ..............Part II: 1-1 Appendix ......................................................... A-1
Teledyne Analytical Instruments Specific Model Information The instrument for which this manual was supplied may incorporate one or more options not supplied in the standard instrument. Commonly available options are listed below, with check boxes. Any that are incorpo- rated in the instrument for which this manual was supplied are indicated by a check mark in the box. Instrument Serial Number: __________________________ The instrument with
Trace Oxygen Analyzer Teledyne Analytical Instruments Preface Overview The Analytical Instruments Model 3010TB Trace Oxygen Analyzer is a versatile microprocessor-based instrument for detecting parts-per-million (ppm) levels of oxygen in a variety of background gases. It is a “split architecture” instrument. This means that a general purpose Control Unit, designed for nonhazardous areas only, remotely controls a specially de- signed Analysis Unit, o
Teledyne Analytical Instruments Model and Part Number Designations The part numbers are the most specific identification. When using this manual for operation, maintenance, or ordering parts, check the part num- bers on your Instruments to be sure of a match. Where an underscore (_) appears in a model number, the unit has more than one application. For example, 3010T_C means that the same unit is part of the 3010TAC and the 3010TBC series a
Trace Oxygen Analyzer Teledyne Analytical Instruments Main Features of the Analyzer The Model 3010TB series Oxygen Analyzers are sophisticated yet simple to use. The main features of these analyzers include: • A 2-line alphanumeric display screen, driven by microprocessor electronics, that continuously prompts and informs the operator. • High resolution, accurate readings of oxygen content: from low ppm levels through 25%. Large, bright, meter rea

Teledyne Analytical Instruments Owners Instructions: