LevelOne NetCon WBR-3408 Operation & User’s Manual

(Roteador banda-larga sem fio- Wireless G) Ver. 3.000 ...

tions to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthorized change or modification is made. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of ...

This product incorporates open source code into the software and therefore falls under the guidelines governed by the General Public License (GPL) agreement. Adhering to the GPL requirements, the open source code and open source license for the source code are available for free download at http://global.level1.com. If you would like a copy of the GPL or other open source code in this software on a physical CD medium, LevelOne (Digit ...

CHAPTER 1 INTRODUCTION ........................................................................................ 6 Wireless Router Features ............................................................................................ 6 Package Contents ...................................................................................................... 10 Physical Details .................................................................... ...

Config File .................................................................................................................. 90 Logs ............................................................................................................................. 91 E-Mail .............................................................. ...

and capabilities. Congratulations on the purchase of your new Wireless Router. The Wireless Rou- ter is a multi-function device providing the following services:  Shared Broadband Internet Access for all LAN users.  Wireless Access Point for 802.11b and 802.11g Wireless Stations.  4-Port Switching Hub for 10BaseT or 100BaseT connections. Installation Wirel ...

 Application Level Gateways (ALGs). Applications which use non- standard connections or port numbers are normally blocked by the Firewall. The ability to define and allow such applications is provided, to enable such ap- plications to be used normally.  Port Triggering. This feature, also called Special Applications, allows you to use Internet applications which normally do not function when used behind a ...

changed quickly and easily.  WPS Support. WPS (Wi-Fi Protected Setup) can simplify the process of connecting any device to the wireless network by using the push button confi- guration (PBC) on the Wireless Access Point, or entering a PIN code if there's no button.  WDS Support. Support for WDS (Wireless Distribution System) allows the Wireless Access Point ...

prevent unauthorized users from modifying the configuration data and settings.  Wireless LAN Security. WPA-PSK, WEP and Wireless access control by MAC address are all supported. The MAC-level access control feature can be used to prevent unknown wireless stations from accessing your LAN.  NAT Protection. An intrinsic side effect of NAT (Netw ...

missing, please contact your dealer immediately.  WBR-3408 11g Wireless Broadband Router  1 Cat-5 Ethernet (LAN) cable  Power Adapter  Quick Installation Guide  CD-ROM containing the on-line manual. ...

other wireless device to perform WPS syncing to create a secured wireless connection automatically. Wireless Security On - Wireless security is On. Off - Wireless security is Off. Flashing (Blue) - When WPS sync in progress. Wireless On - Wireless Devices or Computers are connected to the WBR-3408. Off - No Wireless connections c ...

Button Push button for 3 seconds to Enable or Disable the wireless signal. Reboot or Reset Reboot - Press WPS and Wireless On/Off buttons together for 5 seconds. The router will restart and boot again. Reset – Press WPS and Wireless On/Off buttons together for 10 seconds. All settings will be CLEARED and restored to factory defaults. Rear Panel Rear Panel Power port Connect the supplied power adapter here. WAN port (10/1 ...

Requirements  Network cables. Use standard 10/100BaseT network (UTP) cables with RJ45 connectors.  TCP/IP protocol must be installed on all PCs.  For Internet Access, an Internet Access account with an ISP, and a DSL con- nection.  To use the Wireless Access Point, all Wireless devices must be compliant with the IEEE 802.11g or IEEE 802.11b specifica ...

Select a suitable place on the network to install the Wireless Router. For best Wireless reception and performance, the Wireless Router should be positioned in a central location with mini- mum obstructions between the Wireless Router and the PCs. Also, if using multiple Access Points, adjacent Access Points should use different Channels. 2. Connect LAN Cables Use standard LAN cables to connect PCs to the Swit ...

Overview This chapter describes the setup procedure for:  Internet Access  LAN configuration  Wireless setup  Assigning a Password to protect the configuration data. PCs on your local LAN may also require configuration. For details, see Chapter 4 - PC Configuration. Other configuration may also be required, depending on which features and func- tions of the Wireless ...

settings or features:  PC Database  Config File  Logs  E-Mail  Diagnostics  Remote Administration  Routing  Upgrade Firmware Chapter 7: Advanced Administration ...

and configure it, using your Web Browser. Your Browser must support Java- Script.  Internet Explorer 6 and above is recommended. Preparation Before attempting to configure the Wireless Router, please ensure that:  Your PC can establish a physical connection to the Wireless Router. The PC and the Wireless Router must be directly connected (us ...

If the Wireless Router does not respond, check the following:  The Wireless Router is properly installed, LAN connection is OK, and it is powered ON. You can test the connection by using the "Ping" com- mand:  Open the MS-DOS window or command prompt window.  Enter the command: ping 192.168.0.1 If no response is received, either the connection is not working, or your PC's IP address is not compatible with the Wirel ...

DSL Modems Type Details ISP Data required Dynamic IP Address Your IP Address is allo- cated automatically, when you connect to you ISP. None. Static (Fixed) IP Address Your ISP allocates a per- manent IP Address to you. IP Address allocated to you. PPPoE You connect to the ISP only when required. The IP address is usually allocated automatically. User name and password. PPTP, L2TP PPTP is mainly used in Europe. You connect ...

in future, you will see this screen when you connect. An example screen is shown below. Home Screen Main Menu The main menu, on the left, contains links to the most-commonly used screen. To see the links to the other available screens, click "Advanced" or "Administration". The main menu also contains two (2) buttons:  Log Out - When finished, you should ...