Lexmark 6500e Installation Supplement Manual

November 2011 www.lexmark.com Lexmark and Lexmark with diamond design are trademarks of Lexmark International, Inc., registered in the United States and/or other countries. All other trademarks are the property of their respective owners. © 2011 Lexmark International, Inc. All rights reserved. ...

INC., PROVIDES THIS PUBLICATION “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICUL ...

Overview...................................................................................................................................................5 Using this guide......................................................................... ...

Controlling access to device functions....................................................................................................33 Configuring PKI Held Jobs ............................................... ...

Overview This guide describes how to configure a supported LexmarkTM multifunction printer (MFP) to reach Common Criteria Evaluation Assurance Level 2 (EAL 2). It is critical that you carefully follow the instructions in this guide, as failure to do so may result in a device that does not meet the requirements of the evaluation. Usin ...

• The MFP is installed in a cooperative, nonhostile environment that is physically secure or monitored and provides protection from unauthorized access to MFP external interfaces. • The administration platform and local area network are ph ...

Once a lock is attached, the metal plate and system board cannot be removed, and the security jumper cannot be accessed without causing visible damage to the device. Note: If you are using a Lexmark 6500e scanner with a T650, T652, T654, or T656 printer, then you must attach a lock to both the scanner and the printer. 1 Verify that the MFP c ...

touch screen. 4 Scroll through the configuration menus to locate the Disk Encryption menu selection. 5 Touch Disk Encryption > Enable. Warning: Enabling disk encryption will erase the contents of the hard disk. 6 The following message appears ...

You can achieve an evaluated configuration on a non-networked (standalone) device in just a few steps. For this configuration, all tasks are performed at the device, using the touch screen. Configuring the device Configuration checklist This checklist outlines the steps required to implement an evaluated configuration on ...

screen. 4 Set Use Backup Password to On. 5 Touch Submit. Creating user accounts Creating internal (device) accounts for use with the evaluated configuration involves not only assigning a user ID and password to each user, but also segmenting users into ...