Lexmark 4227 - Forms Printer B/W Dot-matrix Operation & User’s Manual

The following paragraph does not apply to the United Kingdom or any country where such provisions are inconsistent with local law: LEXMARK INTERNATIONAL, INC. PROVIDES THIS PUBLICATION "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS ...

Unpacking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Installing the Ribbon Cartridge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Connecting the Power Cord . . . . . . . . . . . . . . . . ...

Manual Tear-Off (Auto Tear-Off Set to Off) . . . . . . . . . . . . . . . . 48 Setting AutoGap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48 AutoGap Set to On . . . . . . . . . . . . . . . . . . . . . . ...

Auto Sheet Feeder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85 Installing the Auto Sheet Feeder . . . . . . . . . . . . . . . . . . . . . . . . . 87 Loading Paper in the Auto Sheet Feeder. . . . . . . . . . . . . . . . . . . 90 ...

Index. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 149 ...

1 Unpacking 1 Remove the printer from the carton. Caution: Do not lift the printer by yourself; it weighs 21 kilograms (46 pounds). If any items are missing or damaged, contact your point of purchase. If you need to purchase a parallel printer cable, we recommend Lexmark part number 1329605 (3.05 m or 10 ft. ...

2 Getting Started 2 Place the printer so that the front of the printer aligns with the edge of the desk or table. Note: If you want to print more than 100 forms, make sure they stack up below the printer (on the floor) when they are finished printing in order to prevent jams. 3 Remove all packing tape from the printer. 4 Pull up th ...

4 Getting Started Installing the Ribbon Cartridge 1 Make sure the printer is Off. 2 Make sure the top cover is removed. If you need help, see step 4 on page 2. 3 Manually move the printhead to the far side of the printer. ...