Liebert RCM8DO Installation & User Manual

Text of the manual

S I T E M O N I T O R I N G

RCM8CE & RCM8DO Remote Contact Module INSTALLATION & USER MANUAL

TABLE OF CONTENTS

NOTE..........................................................................................................................................5 Section 1: INTRODUCTION......................................................................................................1 Specifications........................................................

This equipment has been tested and found to

comply with the limits for a Class A digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy

Section 1: INTRODUCTION

The Liebert RCM8CE and RCM8DO Remote Contact Monitors annunciate alarms by monitoring eight contact-closure points, each point wired directly to the RCM8. Contact Liebert Environmental Service & Support at 800-543-2778 regarding installation, operation, or warranty issues. When the RCM8 receives an alarm signal, a piezoelectric siren

2 • User Manual (7/99)

Environmental Conditions: Operating Temp: 5°C to 40°C Operating Relative Humidity: 0%-95% (non-condensing) Operating Altitude: up to 2,000 meters Pollution Degree: 2 Enclosure Type: NEMA 1 (for indoor use only) Enclosure Protection: IP30 (protection against solid foreign objects 2.5mm or greater, no protection from water) Display

Other Car Alarm Manuals