Liebherr 7082 321-00 Operating Instructions Manual
Text of the manual
Description of appliance and equipment
Type plate
Operating and control elements (refrigerator compartment)
Disposal notes
• Keep packaging materials away from children - polythene
sheets and bags can cause suffocation!
• Please return the packaging to an official collection point.
Your old appliance: This contains
Safety instructions and warnings
• To prevent injury or damage to the unit, the appliance should be
unpacked and set up by two people.
• In the event that the appliance is damaged on delivery, contact
the supplier immediately before connecting to the mains.
• To guarantee safe operation, ensure that the appliance is set up
and connecte
Setting the temperature
• Press button
for 1 second. The temperature display flashes.
• To increase the temperature (warmer): press button
.
• To reduce the temperature (colder): press button
.
• Press button
again.
The desired temperature setting is saved.
Audible warning signal
The audible warning signal will sound in certain alarm events.
appears in the display, the appliance has a fault. Consult
your nearest customer service point.
2. LED
flashes, the display reads HI or LO
The interior is too warm (HI) or too cold (LO).
The audible warning signal sounds.
Note
The alarm parameters can be adjusted. See Adjusting the alarm
parameters.
3. HACCP flashes
Example of an alarm query
Situation: HACCP flashes in the display.
Display =
Display =
There has not been an alarm status with a
too high or too low temperature. You must
switch to display
.
Display =
Press this button until
appears in the display.
Display =
1 power failure has occurred.
Display =
Display =
Last power failure.
Display =
Year 201
Calibrating the product sensor
Possible tolerances of the product sensor (the set temperature
compared to the actual interior temperature) can be offset with
this function.
Press
for 5 seconds. Display =
Display =
Display =
Display =
Display = .
Use buttons
or
to increase or decrease the correction value
in 0.1°C increments.
Display = actual (
The lock in the appliance door is
equipped with a safety mechanism.
Locking the appliance:
• Insert the key as shown by arrow 1.
• Turn the key 90°.
To unlock the appliance, the same
procedure must be repeated in the
same order.
Cooling
The grid shelves can be
moved to accommodate
different height bottles or
packages.
The ventilation slot
You may be able to rectify the following faults by checking
the possible causes yourself:
• Appliance does not function:
– Is the appliance switched on?
– Is the plug correctly fitted in the mains socket?
– Is the fuse intact?
• Loud running noise:
– Is the appliance set up firmly on the floor?
– Does the appliance cause nearby