Linear COMP-DA-1X3 Operation & User’s Manual
Text of Linear COMP-DA-1X3 Operation & User’s Manual
1x3 Component / Audio
Distribution Amplifier
Model # COMP-DA-1X3
U S E R M A N U A L
www.linearcorp.com
ASKING FOR ASSISTANCE
Technical Support:
Telephone
(800) 421-1587
(760) 438-7000
Fax
(760) 438-7199
Technical Support Hours:
6:30 AM - 4:30 PM PST Monday through Friday.
Email:
[email protected]
Website:
www.linearcorp.com
Notice
Linear LLC reserves the right to make changes in the hardware, packaging
and any accompanying documentation without prior written notice.
© 2008 Linear LLC, All Rights Reserved
TABLE OF CONTENTS
Introduction
1.
Features
2.
Panel Descriptions
3.
Connecting and Operating the 1x3 Component / Audio Distribution Amplifier
4.
(DA) and Application Diagram
Wiring Diagram
5.
Specifications
6.
Warranty
7.
The Linear 1:3 Component With Audio Distribution Amplifier is the perfect solution
for anyone who needs to send one source of high definition component video
and analog or digital audio to multiple displays at the same time. It supports all
component equipment, such as DVD players and satellite set top boxes and all
component displays. In operation, the component video source is connected to the
distribution amplifier at the input. Three outputs are availa
Connects up to three component displays at the same time to one video source
•
Supports HDTV (Component, YPbPr, RGsB) and SD (Composite, YCbCr) input
•
signals
Supports HDTV resolutions up to 1080p
•
Both analog and digital audio outputs are active
•
Includes:
(1) 1x3 Component / Audio DA
(1) 6ft Component cable
(1) 5V DC Power Supply
(1) Users Manual
2
Linear COMP-DA-1X3
PANEL DESCRIPTIONS
3
Component
Input
5V DC
Power Input
Power LED
Component
Out 1
Component
Out 2
Component
Out 3
Digital Audio
Input
Analog Audio
Input
Digital Audio
Out 1
Analog Audio
Out 1
Digital Audio
Out 2
Analog Audio
Out 2
Digital Audio
Out 4
Analog Audio
Out 3
CONNECTING AND OPERATING THE 1x3 COMPONENT / AUDIO DA
4
Connect the supplied Component cable from the source into the 1x3
1.
Component / Audio DA’s input port.
Connect either a SPDIF digital audio or RCA analog right and left audio cable
2.
into the 1x3 Component / Audio DA’s audio input port.
Connect the Component and audio cables from your display(s) (up to 3) into the
3.
Component and audio out slots on the 1x3 Component / Audio DA.
Plug the 5V DC p
Input ........ YPbPr x1 or RGsB x1 (or RGBHV), or Composite x 1 (1 Vp-p@ 75 Ohm)
Output .......................................... YPbPr x3, or RGsB(or RGBHV), or Composite x 3
Audio input ................................................................................... Digital (SPDIF) x1 + R/L x1
Audio output ................................................................................. Digital (SPDIF) x3 + R/L x3
Analog audio input/
Note: These products are designed to be installed and serviced by trained professional
installation companies.
Linear LLC warrants this product to be free from defects in material and workmanship. For the
term of the warranty, see the list of products below. The Warranty Expiration Date is reflected by
a date code that is affixed to all of Linear’s products. This warranty extends only to wholesale
customers who buy direct from Linear or throu