Magnavox FP4640 Manual 

Dear MAGNAVOX product owner: Thank you for your confidence in MAGNAVOX. You've selected one of the best-built, best-backed products available today. And we'll do everything in our power to keep you happy with your purchase for many years to come. As a member of the MAGNAVOX "family," you're entitled to protection by one of the most comprehensive warran ...

precautionswhichyoushouldbeparticularlyawareof. 1. ReadInstructions- Allthesafetyandoperatinginstructions should bereadbeforetheapplianceisoperated. 2. RetainInstructions- Thesafetyandoperatinginstructionsshould beretainedfor futurereference. 3. HeedWarnings- Allwarningsontheapplianc ...

Safety/Precautions ..................................................... 3 Table of Contents ....................................................... 4 Features and Model Information................................ 5 _._ On-Screen Features PICTURE MENU "¢,Adjusting Color, Brightness, Sharpness, Tint, and Picture Controls ................................... 6 •O_Usingthe Ciearview Contro ...

sets the TV for local channels and the correct picture signal (antenna or cable). It even helps you make the necessary connections for the Picture-In-Picture (PIP) feature. Infrared Remote Control which operates your TV set and a variety of wireless remote control VCRs and Cable TV Converters. A special 'q..ocator" feature can also help you find the remote when it has been stuck out of sight or misplaced. Standard TV b ...

icture controls, select a TV channel and follow the steps shown below: Select BRIGHTNESS, PICTURE, COLOR, TINT, or SHARPNESS picture control. With the PICTURE MENU on screen, move the RED highlight with the MENU (M) 4_ buttons. Then press the MENU button. _,_ Press the (+) or (-) buttons to [ adjust the selected control. _.'_ Press the STATUS button to clear the screen. O Remember. When the bar scale is centered, control setting ...

feature hich smoothes out background snow (or picture noise) without losing picture image detail or crispness. _ Select CLEARVIEW control. With the PICTURE MENU on screen, move the RED highlight with the MENU (M) 4_ buttons. Then press the MENU button. _ Press the MENU &V buttons to move the RED highlight. Press the MENU button to select 0,,_) the ENHANCED mode. _',_ Press the STATUS button to I cle thes.ee I III I m q ...

ining up of the red and blue light paths on the TV screen. NOTE: If no color fringing (see Smart Help) shows, then no Convergence adjustments are necessary for your TV. _ Select CONVERGENCE control. With PICTURE MENU (2 of 2) on screen, move the REDhighlight with the MENU (M)4$_ buttons. Then press the MENU button. _.P_ If there is RED or BLUE color I ringing on the White cross, press the MENU button to continue. _'b Press the MENU ...

ontrol to keep skin tone hues (or facial tint) from varying from TV channel to TV channel. _1_ Select FLESH CORRECTION control. With PICTURE MENU (2 of 2) on screen, move the RED highlight with the MENU (M) _ buttons. Then press the MENU button. _X_ Press the MENU &V buttons to move the RED highlight. Press the MENU button to turn (v'O the FLESH CORRECTION control ON. _3-'_ Press the STATUS button to clear the screen. @ _ MENU ...... ...

rough either the ANTENNA ,plug or the AUDIO/VIDEO INput .jacks (on the rear of the TV). The Picture Source control simply tells the TV which one of these picture sources it is to show on the TV screen. _ Select PICTURE SOURCE SELECT control. With the FEATURES MENU on screen, move the RED highlight with the MENU (M)4-) buttons• Then press the MENU button. > Press the MENU AV buttons to move the RED highlight. Press the MEN ...

television programs on the TV screen. Designed to help the hearing impaired this feature uses on-screen "text boxes" to show dialogue and conversations while the TV program is in progress. 1> Select CLOSED CAPTIONING control. With the FEATURES MENU on screen, move the RED.highlight with the MENU (M) 4_ buttons. Then press the MENU button. _ Press the MENU &_' buttons to move the RED highlight. Pre ...

et to pick up either Cable TV or Antenna signals. In other words the TV needs to know if you connected a Cable TV signal or a normal antenna to its ANTENNA plug. NOTE: If you went through First Time Setup (in your Quick Use Guide), this task has already been completed for you. <2,> SelectCABLECHANNEL TUNING control. With the FEATURES MENU on screen, move the RED highlight with the MENU (M) 4_ buttons. Then press the MENU_butt ...

set itself r local area (or Cable TV) channels. This makes it easy for you to select only the 73/stations in your area when the CHANNEL • • buttons are pressed. NOTE: If you went through First Time Setup (in your Quick Use Guide), this task has already been completed for you. J_ _,1_ Select CHANNEL MEMORY (START AUTOPROGRAMMING) control. With the FEATURES MENU on screen, move theRED highlight with the MENU (M)_ buttons. Then pre ...

usted from a MENU screen shown on the TV. A MENU is nothing more than an on-screen list of features. Each MENU item can be adjusted by viewing the screen and pressing a button. [ BEGIN I _ Press the MENU button on the remote or TV. A list of TV ADJUSTMENT controls appears on the TV screen. <_ Press the MENU AY buttons (on the remote) to move the RED ARROW to the desired TV Adjustments section. (See next page for list of control ...

• Press MENU &Y to move Red Arrow to desired comrols list. • Press MENU to xelect highlighted controls list. PICTURE/SOUND CONTROLS -- EXIT m PICTURESOURCESELECT BRIGHTNESS PICTURE TINT SHARPNESS USE_. THEN{_ TOSELECT. • Pr©ssMENU &V to move up and down list of control items. • Pr¢_ MENU to ...

of previously viewed channels can be selected from the Alternate Channel (A/CH) button on your remote control. With ;his feature you can easily switch ,between different TV programs that currently interest you. The ALT. CHN. menu control allows you to set up to four channels in the viewing "ring ". ) Select ALTERNATE CHANNEL control. With FEATURES MENU (2 of 3) on screen, move the REDAhighlight with the MENU (M) _ buttons. Then press the ...

ontrol you can change the size and location of the on screen channel and clock information. <'1,,,_ Select CHANNEL DISPLAY control. With FEATURES MENU (2 of 3) on screen, move the RED highlight with the MENU (M)4_) buttons. Then press the MENU button. <_ Press the MENU AY and MENU (M) buttons to highlight I and select (t,,*) the LARGE or I SMALL display control. _,_,_,_ Press the STATUS button to clear the screen. @ FF._TU_ ...

any channels they think children should not watch. A channel placed under Parental Control cannot be viewed until a correct access code is used to unlock the channel for viewing. First let's set your Parental Code: _ Select the PARENTAL CONTROL. With FEATURES MEN[/(3 of 3) on screen, move the RED highlight with the MENU (M) l_k buttons. Then press the MENU button. "BLOCK CHANNELS" and "SETUP CODE" s ...

de number has been set (see previous page), you are now ready to select the channels you want to block out or censor. Select the BLOCK CHANNELS control. With FEATURES MENU (3 of 3) on screen, move the RED highlight A with the MENU (M)_-_ buttons. Then press the MENU button. <_ Press the MENU AV and MENU (M) buttons to highlight and select the BLOCK CHANNELS item. _,_ Enter the correct Parental Code number. _ Press Channel &V ...

has individual ound adjustment controls. The BASS (low frequency), TREBLE (high frequency), and Speaker BALANCE may all be used to adjust the sound playback of TV programs. Select BASS, or TREBLE, or BALANCE sound control. With the SOUND MENU on the screen, move the RED highlight with the MENU (M) _t buttons. _F Then press the MENU button. _ Press the (+) or (-) buttons to adjust the sound control to levels you prefer. <_ Press the STATUS butto ...