Marantz MA6100 Operation & User’s Manual
Text of the manual
Contact your local Marantz distributors for warranty information.
RETAIN YOUR RECEIPT AS PROOF OF PURCHASE
Your receipt is proof of a valuable purchase. Keep it in a safe place
where you can easily find it for filing insurance claims when necessary
or when corresponding with Marantz.
IMPORTANT
It is the responsibility of the consumer to es
To ventilate the unit, do not install the unit in a rack or bookshelf, and note the
followings.
- Do not touch the top of the enclosure during operation.
- Do not block the openings in the enclosure during operation.
- Do not insert objects beneath the unit.
- Do not block the ventilation slots at the top of the unit.
Do not place anything about 1
HOW TO CONNECT A PLUG
The wires in the mains lead are coloured in accordance with
the following code:
BLUE—”NEUTRAL” (“N”)
BROWN—”LIVE” (“L”)
1. The BLUE wire must be connected to the terminal which is
marked with the letter “N” or coloured BLACK.
2. The BROWN wire must be connected to the terminal which
is marked with the l
Thank you for purchasing the Marantz MA6100 power ampli-
fier for your sound system. Please take a few minutes to read
this manual thoroughly, before you attempt connections and
operation.
The Marantz MA6100 is a monophonic (single channel) ampli-
fier, that is designed for home theater and high quality audio
systems.
2. FEATURES
�
Nq POWER switch
Press the button to turn power on (POWER ON mode), and
press it again to turn power off (POWER OFF mode). When it
is required to remote control the power mode of the MA6100,
be sure to leave this switch in the POWER ON mode.
Nw
Nw
Nw
Nw
Nw POWER ON indicator
A POWER ON/ STANDBY indicator The indicator glow red
when the u
Connection for a 5-channel system
-
IN
OUTPUT
~
INPUT
5-13VDC
+
INVERT
OUT
VIDEO/
EXT.CONT.IN
8 OHMS
REMOTE CONT.
SPEAKER SYSTEM
-
IN
OUTPUT
~
INPUT
5-13VDC
+
INVERT
OUT
VIDEO/
EXT.CONT.IN
8 OHMS
REMOTE CONT.
SPEAKER SYSTEM
-
IN
OUTPUT
~
INPUT
5-13VDC
+
INVERT
OUT
VIDEO/
EXT.CONT.IN
8 OHMS
REMOTE CONT.
SPEAKER SYSTEM
-
IN
OUTPU
The amplifier does not operate and the POWER ON
indicator does not light.
– Is the power cable plugged in properly to the AC power
outlet?
The POWER ON indicator lights, but the amplifier does
not function.
– Are speaker cables and input cables connected properly?
9. SPECIFICATION
Rated output (20 Hz~20 kHz) .................
00/06 MITs 329J851310
Printed in Japan
is a registered trademark.
Lucasfilm and THX are registered trademarks of Lucasfilm Ltd.
COUNTRY
COMPANY
ADDRESS
ALGERIE
Azur 2000
8, Lotissement Ben Hatadi, Alger, Algerie
ARMENIA
NGYIG Ltd.
47 A/75 St. Lalaiants, 375000 Yerevan, Armenia
AUSTRALIA
Jamo Australia Pty. Ltd.,
24 Lionel Road, Mt. Waverley, VIC 3149, Au