Megxon TX3000 Manual
Text of Megxon TX3000 Manual
Table Of Contents
-------------------------------------------------------- 4
Safety Notes
Introduction ----------------------------------------------------- 5-9
Accessories Included ----------------------------------------------- 5
External View ------------------------------------------------------- 6
Mode Dial (Working Modes) ---------------------------------------- 7
Focus Range ----------------------------------------
Digital Camera Camera Diver 2 x AA Batteries
& Ulead Software
Camera Pouch User Manual Quick Start Guide
USB Cable Wrist Strap SD Card (Optional)
User
Manual
Quick
Start
Guide
Do not try to open the ca
DC In Connector
Flash
View Finder
Self-timer LED
Introduction
Mode Dial
Focus Range
Shooting Mode
Playback Mode
Movie Clip Mode
Setup Mode
( )
( )
( )
( )
Macro
: 0.18m~0.25
TFT LCD Monitor Icon Definition
Introduction
Safety Notes
Icon Index
Memory card inside
Image quality
(
)Super fine
(
)Fine
(
)Normal
Image size
( )2048x1536
( )1600x1200
( )1280x960
( )640x480
Exposure
Flash mode
( )Auto flash
( )Auto flash with
red-eye reduction
( )Night scene
( )Fill-in flash
( )Flash off
Working mode
( )Shooting mode
( )Playback mode
( )Movie clip
Preparation For Taking Pictures
Safety Notes
How to Switch On Or Off The Camera
To switch on the camera, slide the Power Switch to the side and
hold it for 1 second.
To switch off the camera, slide the Power Switch to the side and
hold it for 1 second again.
Loading the Batteries
This camera is using 2 x AA batteries.
1. Make sure the camera is switched off.
2. Open the Battery / Memory Card Cover.
Preparation For Taking Pictures 1. Switch off the camera.
2. Open the Battery / Memory Card
Cover.
3. Insert the SD card into the card
slot and press it down until you
hear a click sound.
4. Close the Battery / Memory Card
Cover.
Note
If a new SD card is used, you'll have to format it first.
Please refer to page
for details.
Note
This camera is equipped with a built-in flash memory. The image(s)
can be stored either