Memorex PS/2 Operation & User’s Manual
Text of the manual
PS/2 Mouse User’s Guide
1994-2001 Copyright All Rights Reserved
FCC Statement on CLASS B
Note: This equipment has been tested and found to comply with the limits for
a CLASS B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
when the equipment is operated i
interference that may cause undesired operation.
1. Hardware Installation
Installing a Mouse with Mouse Port (PS/2) Connector
If you have a mouse with a round mouse port connector, you must turn off
the computer before connecting or disconnecting your mouse.
2. Mouse Driver Installation for Windows 95/98/2000/ME & Windows NT 4.0
To install M
c) Select "Control Panel".
d) Select "Mouse" icon.
e) Select "General".
f) Select "Change".
g) Select a new mouse driver that meets your new requirements.
The new setting will over-ride the old ones.
4. Switching Mouse Mode
4-1.Switching Mouse Hardware Modes (Use mode switch)
The Serial Mouse is
switch the mouse to 'MS' mode when first installing the mouse
driver. After completing the installation, you can switch
to 'PC' mouse mode when you restart the computer.
5. Trouble Shooting
Symptom 1 : No mouse movement.
Solution : Make sure the software that you are using supports a mouse.
- Check that mouse is plugged into serial port a
1) Enable Mouse Port through the Setup Menu (consult your
computer documentation for further information.
3) If adaptor(s) were not included in your package, your mouse
was designed to work on only one type of port
If the problem persists, please check for a possible computer
BIOS ROM upgrade from your computer manufacturer.
Some note