Mesa/Boogie Mark Five Owner's Manual

Congratulations on your choice of the MARK V and welcome to the Mesa/Boogie Fam- ily! The instrument you’ve selected has a deep heritage that combines the best attributes of vintage tube amplification with pioneering innovation that brings high-gain channel switching performance to a new frontier. One look to the right side of ...

PRECAUTIONS OVERVIEW: FRONT PANEL __________________ 1-4 OVERVIEW: REAR PANEL ___________________ 5-6 GETTING STARTED _______________________ 7-10 THE CHANNELS: CHANNEL 1 _______________________________11 CHANNEL 2 _______________________________12 CHANNEL 3 _______________________________13 NOTE FROM THE AUTHOR ________________ 14-16 THE M ...

IMPORTANT SAFETY INSTRUCTIONS Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. Do not install near any ...

The MARK V is really a collection of amplifiers. There are far too many circuits and sounds to think of it as merely an amp. It is also a living history of our company. From the ground breaking MARK I that introduced the world to high-gain with it’s cascading pre amp, to the Mark II - the world’s first high ...

channel contains the biggest differences between modes and there is definitely dialing required as you toggle through the voicing Modes. A stripped, British-inspired EDGE (switch up) unleashes low to mid gain aggression. Low mids are a ...

sound and two different mixes of the PRESET setting on Channels 1 and 2 for your clean rhythm and crunch sounds. The ability to choose between these two options when assigning the Graphic EQ to your sounds gives you ultimate fle ...

10 WATTS reconfigures the whole set of 6L6s so that the two nearest the 5U4 run pure Class A, single-ended—no longer push-pull. This is the ultimate low wattage output circuit that duplicates the essence of the best really old vintage circuits. Here, the second harmonic ...

studio) or available. Simply select which of the Channels you wish to play using this control when the footswitch is not in use. When the Footswitch is to be used, select the position to the far right (when facing Rear Panel) labe ...

without bothering the band or audience. Simply connect your favorite tuner and tap the TUNE the button on the MARK V Footswitch and all sound to the Speaker Outputs is muted. A SLAVE OUTPUT and SLAVE LEVEL Control allows you to capture ...