Metra Electronics 99-7950 Installation Instructions Manual

Phillips Screwdriver I Flat Blade Screwdriver l Utility Knife l Stubby Phillips Screwdriver 1-800-221-0932 www.metraonline.com KIT FEATURES © COPYRIGHT 2003 METRA ELECTRONICS CORPORATION APPLICATIONS 2003-2006 Suzuki XL7 2003-2004 Suzuki Aerio 2003-2005 Suzuki Grand Vitara • DIN Head Unit Provision � ...

- 2003-2006 Suzuki XL7 ---------------------------------------- 1 - 2003-2004 Suzuki Aerio -------------------------------------- 2 - 2003-2005 Suzuki Grand Vitara ------------------------------ 1 •Kit Assembly - Kit Assembly Notes ------------------------------------------- 3 - DIN Head Unit Provision with Pocket ------------- ...

Remove (2) Phillips screws from the bottom of the trim surrounding the radio , A/C controls and clock / hazard switch panel. Screws are facing up. (Figure A) 1 Using stubby (short) Phillips screwdriver, remove the (2) Phillips screws securing clock / hazard switch panel and remove radio trim pla ...

radio and A/C vents below radio. 1 Remove (4) Phillips screws holding radio to sub dash and remove radio. 2 ...

cle you are working with. The tabs are labeled with an (A) for the Aerio and a (V) for the grand Vitara and XL7. (See photo to right) NOTE There are two options to obtain proper fit of the 99-7950 in radio trim panel opening. OPTION 1 Remove the (2) ...

1 Slide the DIN cage into the Radio Housing and secure by bending the metal locking tabs down. 2 Slide the after-market head unit into the cage and secure. Snap the trim plate into thee radio housing. 1 Mount the ISO Brackets to the head unit with the screws supplied with the unit. 2 Slide the head unit into th ...

Metra recomends using the proper mating adapter and making the connections as shown. (Isolate and individually tape off the ends of any unused wires to prevent electrical short circuit.) 2 Re-connect the negative battery terminal and test the unit for proper op ...

99-7950 INSTRUCTIONS ...