Michael Kors MK8293 Instructions Manual

the hours of 10pm and 2am. This is the time when the movement is in position to carry out the automatic date change, and any interference may cause damage to the movement. Date Setting 1. Pull the crown out to position 1. 2. Turn the crown either clockwise or counter-clockwise and set the date for the prev ...

(1 crown) Date Setting 1. Pull crown out to position 2. 2. Turn clockwise to advance date hand. 3. Push crown back to position 1. Date and Time Setting 1. Pull crown out to position 3. 2. Turn clockwise to advance hour and minute hands. The hand showing days of the week will also move with the hour and minute hands. Keep ...

(1 crown) Date Setting 1. Pull crown out to position 2. 2. Turn clockwise to advance the date hand. 3. Push crown back to position 1. Day and Time Setting 1. Pull crown out to position 3. 2. Turn clockwise to advance hour and minute hands. The hand showing days of the week will also move with the hour and minute hands. Ke ...

(with date-VD53) (1 crown/2 pushers) Time and Date Setting 1. Before setting the time, make sure the chronograph is stopped and set to zero (12:00) position. 2. Pull crown out to position 2. 3. Turn crown clockwise until the previous day’s date is displayed. 4. Pull crown out to position 3 when the second hand is at the 12 ...

(1 crown/2 pushers) Time Setting 1. Pull crown out to position 3. Chronograph second hand will return to “0.” Do not return the crown to position 1 while the hands are returning to “0,” or else the position the hands are at when this is done will be recognized as the new “0” position. 2. Turn crown to set the des ...

2. Turn crown counter-clockwise until the correct date is shown in the date window. 3. Return crown to position 1. Chronograph Zero Reset This procedure should be performed when the chronograph second hand does not return to the “0” position after the chronograph has been reset. 1. Pull crown out to positio ...

General Description / Features: TIME with 24-Hour Feature DUAL TIME ANA-DIGI ALARM with 2 alarms CHRONOGRAPH with stored data TIMER EL light operation Analog Time Setting 1. Pull the crown out to position 2. 2. Turn the crown to set the hour and minute hands to the desired time. 3. Return the crown to position 1. Digital Function/ ...

NoTe: In any setting mode, if there is no activity for 30 seconds, all changes will be saved and the display will automatically return to display mod ...

3. Press D to display current set; press D again to switch to the next set. 4. Press and hold D 3 seconds to delete all stored data in the current set displayed. Alarm Mode 1. Press B to change to Alarm Mode. 2. Press C to toggle alarm on/off. 3. Press D to switch between alarm 1/alarm 2. 4. In Alarm Mode, press and hold A 3 seconds ...

General Description / Features: ANA-DIGI TIME ALARM LIGHT Analog Time Setting 1. Pull the crown out to position 2. 2. Turn the crown to set the hour and minute hands to the desired time. 3. Return the crown to position 1. Digital Function/Setting A – LIGHT / SETTING BUTTON •� Press�to�illuminate�the�display. •� Pres ...