Miele SEB 215 Operating Instructions Manual
Text of Miele SEB 215 Operating Instructions Manual
Gebrauchsanweisung für Elektrobürste
G
Electrobrush Operating Instructions
M
Gebruiksaanwijzing voor elektroborstel
F
Mode d’emploi pour électrobrosse
I
Istruzione d’uso per spazzola elettrica
E
Instrucciones de manejo cepillo eléctrico
P
Instruções de utilização para Escova eléctrica
g
�δηγίες �ρήσης για ηλεκτρικές ��ύρτσες
T
Elektrikli Fırça Kullanma Kılavuzu
j
Brugsanvisning for elektrobørste
N
Br
This Electrobrush conforms to
current safety requirements.
Incorrect use can, however, present
a risk of both personal injury and
material damage.
To avoid the risk of accidents and
damage to the vacuum cleaner and
to the brush please read these
operating instructions, as well as the
instructions supplied with the
vacuum cleaner, before using this
appliance for the first time.
Keep these instructions in a safe
place, and make them available to
future users
Never touch the roller brush while
it is rotating. Danger of injury.
Do not use the Turbobrush at head
level. Long hair, ties, scarves etc.
could be vacuumed in and become
entangled in the roller brush.
Keep the Electrobrush away from
curtains, clothing etc, as these
could be vacuumed in and become
entangled in the roller and possibly get
damaged.
Do not vacuum up items which are
heavy, hard or have sharp edges.
They could block the Electrobrush and
th
These operating instructions are for
Electrobrush models:
1. SEB 217 for hand-held vacuum
cleaners and
2. SEB 215 / SEB 216 for cylinder
vacuum cleaners.
The illustrations referred to in the text
are shown at the end of the operating
instructions.
Using the Electrobrush
The Electrobrush is particularly suitable
for intensive vacuuming of carpets
which are subject to hard wear. It is
very effective at removing deep seated
dirt and pre
Connecting the Electrobrush
to the vacuum cleaner
Connect the Electrobrush to the
vacuum cleaner as shown in the
illustrations at the end of the operating
instructions.
Hand-held vacuum cleaner - see
illustration a
Cylinder vacuum cleaner - see
illustration b
This illustration shows connection to an
S 300 / S 400 series vacuum cleaner as
an example.
The position of the socket for connec-
ting the Electrobrush will depend on the
vacuum cleaner model.
For S
Always disconnect the vacuum
cleaner from the electrical supply
for maintenance work and cleaning.
Switch off at the wall socket and
remove the plug.
Removing threads and hairs
(illustrations e, f and g)
^ Cut any threads or hairs that have
become entangled on the roller brush
with a pair of scissors. Then run the
vacuum cleaner to vacuum up the
bits.
For more obstinate tangles or
blockages inside the Electrobrush, the
cover can be opened.
^ Loosen the two