Minolta CA-100PLUS Brochure

ACCURATE LOW LUMINANCE � The luminance and chromaticity of display can be measured as fast as 20 times per second (maximum), reducing the time for automatic adjustment. � Precise measurement can be obtained at low luminance of 0.05 cd/m2 and reducing the cycle time. Range of luminance for chromaticity measurement: 0.05 to 1000 cd/m2 (Measuring probe) 0.05 to 2000 cd/m2 (High luminance measuring probe) � Accuracy of ±0.002 for White,±0.004 for R,G,B (Chromaticity) � Compatible with CA-100. � Compact nearly A4 size (width and depth). � Sample software is bundled; you can control easily by PC. � Expandable up to 5 ...

Pattern Generator This is PC software created using standard accessory software CA-SDK and others, and it controls the display drivers such as CA-100Plus and pattern generator to measure the white or black luminance. The white and black correction coefficients are obtained from the measured luminance values of the display, and they are written to the correction circuit of the display. Pattern Signal Writing gain and cutoff level Command to CA-100Plus Data from CA CH01 EXT Fa P1 [EXT D-1.50] POWER 0-CAL MODE REMOTE HOLD MR MEMORY CH PQRS 7 TUV 8 WXYZ MENU ALPHA 9 GHI 4 JKL 5 MNO LOCK 6 CAL White 1 ABC 2 DEF ...

47.4 φ60 30.2 φ44 ISO 5 mm screw (depth : 6 mm) 60 φ45 (Units : mm) Receptor Display range Luminance Chromaticity *1 The chromaticity and luminance are measured under Konica Minolta’s condition (standard CRT (6500 K) is used). *2 The luminance for monochrome is measured when the reading of luminance for white is 40.00 cd/m2. *3 Measuring probe connected to probe connector P1 only,used USB (used RS-232C Baud rate: 38400 bps) *4 At the CA-200 mode � Select the probe among the four types. � Specifications are subject to change without notice. Specifications Detector : Silicon photo cell 0.05 to 1000 ...