Minolta VIVID 9I Brochure

Text of the manual

Delivery Interference check,simulation Prototype evaluation Evaluationoffirst-articleparts,Dieapproval Inspection of mass-produced parts Evaluation/modificationofapprovedmodel Conversionofphysical modeltodigitalformat(CADmodel) Introducing the VIVID 9i non-contact 3D digitizer. This innovative device is ideal

VIVID 9i system

Measurement with VIVID 9i Scanning the target with a laser beam Merging and editing of 3D data Measure targets of any size. Konica Minolta employed its expertise in optical engineering to develop interchangeable high- performance, dedicated lenses. As a result, TELE, MIDDLE and WIDE lenses can be selec

VIVID 9i Measuring area

Positions of digital camera photos 3D data of reference markers Scale bar Reference marker Coded marker PSC-1 Photographing scenario Capture the image with a digital camera Automatic alignment and merging of 3D data Now it’s time to scan the surface detail using the 9i. As each VIVID 9i scan is captured, it is automatically alig

�Engine valve cover

�Bumper Early detection of shape problems Evaluation at cross section Cross section/Grid display/Diagram dimensions/Errors Scanning the sample Example of inspection evaluation report Example of CAT work procedure-Comparison inspection between measured data Measured data (polygon) Impo

Digital Process Re-engineering

s at specific points and CAD data- D data Alignment with CAD data Color map calculation d measured data- Comparison between CAD data and measured data Inspection evaluation report Color map display providing at-a-glance indication of sections within/outside the tolerance range (contour display) ti

The VIVID 9i is based on the principal of laser triangulation. A target is

scanned with laser stripes . The CCD camera receives the light reflected from the surface of the subject. Surface shape measurements of the subject are obtained through triangulation, and converted into a 3D polygon mesh. The VIVID 9i measures 640 x 480 points

Printed in Japan

9242-4892-11 ©2004 KONICA MINOLTA SENSING, INC. 4 SAFETY PRECAUTIONS Read all safety and operating instructions before operating the VIVID 9i. Use only a power source of the specified rating. Improper connection may cause a fire or electric shock. Do not stare into the laser beam. (MAX. 30mW 690nm / CLASS 1 (FDA), CLASS 2 (IEC) LASER

Other Other Manuals