Ryobi RY43161 Operator's Manual

Text of Ryobi RY43161 Operator's Manual

MANUAL DEL OPERADOR

ELECTRIC POLE SAW SCIE ÉLECTRIQUE DE MANCHE ELÉCTRICA SIERRA DE PÉRTIGA RY43161 ALL VERSIONS TOUTES LES VERSIONS TODAS LAS VERSIONES Cette électrique de manche a été conçu et fabriqué conformément à nos strictes normes de fiabilité, simplicité d’emploi et sécurité d’utilisation. Correctement entretenu, cet outil vous donnera des années de fonctionnement robuste et sans pr

Introduction / Introducción

 Important Safety Instructions......................................................................................................... 3-4 Instructions importantes concernant la sécurité / Instrucciones de seguridad importantes  Specific Safety Rules.....

Page 3 — English

WARNING: Read and understand all instructions. Failure to follow all instructions listed below may result in electric shock, fire, and/or serious personal injury. READ ALL INSTRUCTIONS  For safe operation, read and understand all instructions before using this product. Be familiar with all controls and proper use of the machine. Follow all safety instructions. Failure to follow all safety instructions listed below, can result in seri

Page 4 — English

cords immediately. Damaged cords increase the risk of electric shock.  Make sure your extension cord is in good condition. When using an extension cord, be sure to use one heavy enough to carry the current your product will draw. A wire gauge size (A.W.G.) of at least 14 is recommended for an extension cord 50 feet or less in length. If in doubt, use the next heavier gauge. The smaller the gauge number, the heavier the cord. An under

Page 5 — English

SPECIFIC SAFETY RULES  Maintain product with care. Keep cutting edge sharp and clean for best performance and to reduce the risk of injury. Follow instructions for lubricating and changing accessories. Inspect cord periodically and, if damaged, have it repaired by an authorized service facility. Inspect extension cords periodically and replace if damaged. Keep handles dry, clean, and free from oil and grease.  Check damaged parts.

Page 6 — English

Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to operate the product better and safer. SYMBOL NAME EXPLANATION Safety Alert Symbol Indicates a potential personal injury hazard. Read the Operator’s Manual To reduce the risk of injury, user must read and understand operator’s manual before using this product. Wear Eye and Head

Page 7 — English

SYMBOLS The following signal words and meanings are intended to explain the levels of risk associated with this product. SYMBOL SIGNAL MEANING DANGER: Indicates an imminently hazardous situation, which, if not avoided, will result in death or serious injury. WARNING: Indicates a potentially hazardous situation, which, if not avoided, could result in death or serious injury. CAUTION: Indicates a potentially hazardous situation, which, if

Ryobi RY43161 Page 8 — English

It is possible to tie the extension cord and power cord in a knot to prevent them from becoming disconnected during use. Make the knot as shown in figure 1, then connect the plug end of the power cord into the recep- tacle end of the extension cord. This method can also be used to tie two extension cords together. DOUBLE INSULATION Double insulation is a concept in safety in electric power tools, which eliminates the need for the usual

Page 9 — English

PRODUCT SPECIFICATIONS Bar Length........................................................................................................................................ 8 in. Cutting Capacity.............................................................................................................................. 6 in. Chain Pitch........................................................................................................

Page 10 — English

KNOW YOUR POLE SAW See Figure 2. The safe use of this product requires an under- standing of the information on the product and in this operator’s manual as well as a knowledge of the project you are attempting. Before use of this product, familiarize yourself with all ­operating features and safety rules. CORD RETAINER A convenient cord retainer helps keep the extension cord connection secure during tool operation. LOCK-OUT BUTTON

Page 11 — English

Fig. 3 CONNECTING THE POLES See Figure 3. Before using the pole saw, a one-time assembly is required. When removed from the box, the three poles are connected by an electrical cord as shown above. n Remove the four (4) rubber cord protectors from inside the poles. This material protects the cord during shipping and MUST be discarded immediately. n Unscrew the lower collar from the threaded base on the intermediate pole and push back ov

Ryobi RY43161 Page 12 — English

Fig. 4 CHAIN LUBRICANT OIL RESERVOIR CAP QUICK VIEW OIL INDICATOR DANGER: Never cut near power lines, electric cords, or other electric sources. If bar and chain jams on any electrical cord or line, DO NOT TOUCH THE BAR OR CHAIN! THEY CAN BECOME ELECTRICALLY LIVE AND VERY DANGEROUS. Continue to hold the pole saw by the insulated rear handle or lay it down and away from you in a safe manner. Disconnect the electrical service to the dama

Ryobi RY43161 Page 13 — English

CONNECTING TO POWER SUPPLY See Figure 5. This product is designed with a cord retainer that prevents the extension cord from being pulled loose while using. n Form a loop with the end of the extension cord. n Insert loop portion of extension cord through opening in the bottom of the rear handle and place over cord retainer. n Slowly pull loop against cord retainer until the slack is ­removed. n Plug product into extension cord. NOTE:

Page 14 — English

Fig. 6 COLLAR PREPARATION FOR CUTTING See Figures 7 - 8. n Wear non-slip gloves for maximum grip and protection. n Maintain a proper grip on the unit whenever the motor is running. Use your right hand to firmly grip the rear handle while your left hand has a firm grip on the pole shaft. n Hold unit firmly with both hands. Always keep your left hand on the pole shaft and your right hand on the rear handle, so your body is to the l

Page 15 — English

Fig. 9 60° MAXIMUM Fig. 10 LIMBING AND PRUNING See Figures 9 - 10. This unit is designed for trimming small branches and limbs up to 6 in. in diameter. For best results, observe the following precautions. n Plan the cut carefully. Be aware of the direction in which the branch will fall. n Branches may fall in unexpected directions. Do not stand directly under the branch being cut. n The most typical cutting application is to posi- tio

Page 16 — English

WARNING: When servicing, use only identical replacement parts. Use of any other parts could create a hazard or cause product damage. WARNING: Always wear eye protection with side shields marked to comply with ANSI Z87.1, along with head protection. Failure to do so could result in objects being thrown into your eyes and other possible serious injuries. WARNING: Before inspecting, cleaning or servicing the unit, stop the motor, wait for

Ryobi Saw Owners Instructions: