Moffat RN8400G-CB Technical Data Sheet

GAS COOKTOPS 600mm RN8400G-B, RN8400G-CB, RN8400G-LS, RN8403G-B, RN8403G-CB, RN8403G-LS, RN8406G-B, RN8406G-CB, RN8406G-LS Heavy-duty construction 28 MJ/hr open burners Flame failure standard Pilot burners optional 300mm griddle plate options Optional simmer plates 3 models of base unit Stainless steel exterior Easy clean Easy service Fully modular Overall Construction Cooktop • Welded hob with 1.5mm 304 stainless steel bull nose • Splashback and side panels 1.2mm 304 stainless steel • Front panels 0.9mm 304 stainless steel • Aluminised steel internal construction • Cast iron 28MJ/hr open burners with forged brass cap • Vitreous enamelled cast iron potstands • Vitreous enamelled open burner spill covers • Cast iron simmer plates (optional extra) • 12mm thick mild steel griddle plate • 2.5mm 304 stainless steel griddle splash guards • Vitreous enamelled spill trays Griddle sections are standard on RH side. Available on LH side to order or by conversion. Bench mount (supplied as –B model) • Four 63mm dia. heavy-duty 1.2mm 304 stainless steel bench legs with adjustable feet • Adjustable height 80mm – 105mm Cabinet base (supplied as –CB model) • Fully modular for match suite finish • Double skin 0.9mm 304 stainless steel interior and exterior • Optional GN 1/1 4 position racking kit • 63mm dia. heavy-duty 1.2mm 304 stainless steel legs with adjustable feet Leg stand (supplied as –LS model) • Fully modular for matched suite finish • Framed top for connection to Cooktop • 63mm dia. heavy-duty 1.2mm 304 stainless steel legs with adjustable feet • Fully modular framed stand shelf with 0.9mm 304 stainless steel finish • Suitable for rear or through shelf gas connection to Cooktop • Quick assembly design (no tools required) Controls • Variable high to low controls to open burners • Open burners flame failure standard with pilot burners optional • Variable high to low controls to griddles • Griddles standard with pilot, flame failure and piezo ignition • Large easy use control knob - heat resistant reinforced • Easy view control settings on knob Cleaning and Servicing • All models with easy clean stainless steel external finish • Lift off burners heads and vitreous enamelled burner spill covers • Vitreous enamelled spill trays under open burner and griddle sections • Access to all parts from front of unit RN8400G-LS

GAS COOKTOPS 600mm Specifications Burners Open Burners 28MJ/hr dual flame ring with simmer rate Griddle Burners 20MJ/hr Gas power RN8400G 112 MJ/hr, 31kW RN8403G 76 MJ/hr, 21kW RN8406G 40 MJ/hr, 11kW Griddle Plate 300mm Griddle cooking surface 292mm x 475mm, 1387cm2 600mm Griddle cooking surface 592mm x 475mm, 2812cm2 Gas connection R 3/4 (BSP) male 130mm from RH side, 32mm from rear, and 655mm from floor All units supplied with Natural and LP gas regulator Dimensions Bench models Width 600mm Depth 805mm Height 315mm Incl. splashback 530mm All models (excluding Bench model) Width 600mm Depth 805mm Height 915mm Incl. splashback 1130mm Packing data Bench and Leg Stand models 0.37m3 Width 640mm Depth 865mm Height 665mm Cabinet Base models 0.70m3 Width 640mm Depth 865mm Height 1255mm Gas types Available in Natural gas and LP gas Please specify when ordering Units supplied complete with gas type conversion kits Other gas types on request Options at extra cost Simmer plates (replaces Potstand) Ribbed griddle plates Joining caps Castors Plinth mounting RN8400G-B Bench Model Printed in New Zealand © Copyright Moffat Limited Moffat/4639/BH/1M/8.05 RN8400G-CB Cabinet Base RN8400G-LS Leg Stand Plan