Monitor Audio PLW-15 Operation & User’s Manual

2-3 Recycling & RoHS Declaration of Conformity 3 Unpacking 4 Foot/Spike Fixing 4 Introduction 5 PLW-15 Features 5 Amp & Control Panel 6-7 Remote Control Functions 8 Positioning 9 Set Up 9-10 Specification 11 Trouble Shooting 12 Guarantee and Service 13 Claims under this guarantee 13 Data Protection 13 EC Declaration of ...

Read these instructions. 1. Keep these instructions. 2. Heed all warnings. 3. Follow all instructions. 4. Do not use this apparatus with water. 5. 6. Clean only with a dry cloth. Great care and attention has gone into the materials chosen to produce the PLW-15. A gentle wipe with a dry, clean cloth is all that is required to rem ...

CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE •� TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE •� TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE PLUG TO WIDE SLOT AND FULLY INSERT ...

recommend a two-person lift wherever appropriate. The feet/spike assemblies and mains power cord/s are contained within the packaging and should be removed. To remove the PLW-15 from its carton, place some protective material on the floor and havin ...

systems and materials to provide years of enjoyment, reliability and pride of ownership. This product, as with all the Platinum range, is hand crafted from top to bottom using traditional woodworking skills for our sumptuous cabin ...

1 2 4 5 3 6 7 8 8a 9 9 11 10 monitoraudio.co.uk 6 PLW15 manual.indd 6 30/04/2008 10:59:57 ...

1. For connection to a 2 channel/ stereo amplifier system. Connection should be provided by a pair of high-quality signal cables from the pre-out section of an amplifier. Note: - cable lengths should not exceed 10 metres to avoid interference from other electrical appliances. RCA Line Level Outputs (Stereo Left & R ...

and angle limits please refer to the Set Up Guide (page 2). Mute 1. Toggle between mute and normal operation. Mute can only be accessed by using the remote control. Power/ Standby 2. Toggle between standby on/off. Standby ...