Samsung LN32C350D1D Operation & User’s Manual

LN19C350D1D, LN22C350D1D, LN26C350D1D, LN32C350D1D 4 series : LN19C450E1D, LN22C450E1D

2. Connect the USB Memory Drive to the USB port of your PC. Copy the file onto the USB Memory Drive. 3. Go to the USB Memory Drive and then double click the file. 1. Save the firmware file onto your computer. File Name : T-SAT4AUSHC.exe 4. Click on the “Unzip” button. 5. Unzipping is in progress. 6. After completing, click on the “OK” and “Close” buttons. 7. A folder containing the firmware files has been added to the USB memory drive. Folder name : T-SAT4AUSHC 8. Safely disconnect the USB memory drive by right clicking the green check mark on the taskbar and then left click “Safely Remove”. OK

[Step 2] Insert the USB Memory Drive containing the Software into the USB port on the side (or rear) of the TV Step2. How to upgrade the firmware [Step 3] Press the MENU button to display the menu. Press the ▲or ▼button to select “Support”, then press the ENTER button [Step 4] Press the ▲or ▼button to select “Software Upgrade”, then press the ENTER button [Step 5] The message “Scanning for USB. It may take up to 30 seconds” is displayed. [Step 6] Then, the message “Upgrade Version XXXX to version XXXX? The system will be reset after upgrade.” is displayed. Select “Yes”, then press the ENTER button. And then software is upgraded automatically. [Step 7] When the Software upgrade is complete; the TV will turn off and then back on by itself.