Motorola SVG2500 Quick Installation Manual

SVG2500 Networking and Digital Voice Service A home network enables you to access information on two or more computers in your home. You can connect your home network to your cable TV system to connect to the Internet. Your Motorola SVG2500 SURFboard® Wireless Voice Gateway is the central connection point between y ...

About This Guide This guide provides information about: • Network connections and requirements • Battery installation • Cable, Ethernet, USB, and wireless connections • Starting the SVG2500 Configuration Manager • VoIP telephone connection • Network security • Troubleshooting and help information This g ...

SVG2500 Network and Telephone Connections Networks are composed of multiple devices. The drawing below shows a sample SVG2500 connection diagram. ...

Basic SVG2500 Network Requirements You can connect Microsoft® Windows®, Macintosh®, UNIX®, or Linux® computers to the SVG2500 LAN using the following: • A connection to your cable TV system in your residence or business • A subscription from an Internet service provider • One or more computers with minimum ...

In addition, your computer must meet the following requirements: • PC with Pentium© class or better processor • 256 MB of memory • 10 MB of hard disk space available • Windows® 2000, Windows XP™, Windows Vista®, Macintosh, Linux, or UNIX operating system with operating system CD-ROM available You can us ...

Installing the Battery Before you begin the installation, you must first install the battery in your SVG2500. NOTE: A backup battery is not available for some models of the SVG2500. Your Internet Service Provider determines if your SVG2500 is supplied with a battery. 1. Place the SVG2500 on a soft surface to access t ...

3. Align the key pins in the SVG2500 with the key slots on the battery for proper contact. 4. The battery connectors should mate with the connectors on the SVG2500. Make sure the pull-tab is accessible and does not prevent the battery cover from closing properly. ...

5. Reinstall the battery cover with the alignment tabs seated downward. It may take up to 12 hours for the battery to reach full charge when: • It is installed for the first time. • It is replaced. • It is fully discharged. Battery back-up times may vary based on many factors, including the battery age, chargin ...

Connecting the SVG2500 To connect to Ethernet or USB on a PC running a supported Windows version, perform the procedures in the following sections in this guide: Ethernet A, B, and E USB A, C, and E Wireless A, D, and E For Macintosh or Linux computers, follow the instructions in the SVG2500 User Guide and the oper ...