Moultrie GAMESPY DIGITAL CAMERA M80 Instructions Manual

read this booklet before using the unit. If you should have any questions about this product or any other Moultrie product, please contact us using the information on the back of this booklet. Please register your camera at www.moultriefeeders.com to activate your warranty. Instructions for M80 GameSpy Digital Camera ON/OFF/AIM LCD Display Navigation Buttons Camera Lens Aim LED LED Flash ...

Used for turning On, turning Off, or Aiming the camera. When in AIM position the red LED light on the front of the camera will illuminate. To help find the center field of view for the camera, stand out in front of the camera and move left or right as you observe the AIM LED - as you walk away from direct center the LED light will be less bright. As you walk towards center the LED will appear brighter. MODE BUTTON The Mode Button sel ...

the slide-out Battery Tray. Install four(4) or eight(8) AA size alkaline or lithium batteries with polarities as indicated in the Battery Tray. Re-install the Battery Tray. Thread the provided Mounting Strap through the Eyelets on the back of the camera and secure to a tree or pole approximately 36" from the ground as shown. Turn Camera on by sliding ON/OFF/AIM switch to the ON positi ...

Still photos are taken when an animal is detected. The number of photos taken when an animal is detected is configurable in Settings. Photos are stored in the in the DCIM/100_MDGC folder on the SD card. PLOT CAM MODE The camera takes photos at a specified interval during the day and combines them together to create a Plot Video (*.MLT file) which can be viewed on the supplied Moultrie Plot Stalker software. The camera takes a Plot Video twi ...

Page 5 Setup Menu - The UP/DOWN buttons are used to navigate through the available setting choices. UP/DOWN moves to the next menu item, and ENTER selects the item to be changed. Additional menu choices are available by hitting the UP/DOWN button when either the first/last option is highlighted. Date/Time - Set Date /Time - on the SETUP DATE/TIME screen, use the UP/DOWN buttons to modify the month. Press LEFT/RIGHT buttons to mov ...

STILL in the Capture Mode screen, the camera can take 1, 2, or 3 pictures each time an animal is detected. There is an approximate 5 second delay between pictures based on battery strength. To change the number of pictures taken, press the UP/DOWN buttons to highlight the desired setting. Press the ENTER button to save the setting and return to the Camera Setup Menu. Video Resolution ...

photos and provides a point of reference when multiple cameras are used. To change the Camera Name, use the LEFT/RIGHT buttons to highlight the character to be modified. Press the UP/DOWN button to select the desired character (A to Z, 0 to 9, dash or space). Press LEFT/RIGHT to move to the next character. Press the ENTER button to save the new camera name and return to the Camera Setup M ...

that the camera will be active. To change the plot duration, press the UP/DOWN buttons to highlight the desired setting. Press the ENTER button to save the setting and return to the Camera Setup Menu. Plot duration can be set to All Day, 1, 2, 3, or 4 hours. • All Day – Plot cam takes photos all day • 1 Hour – Plot cam takes photos for 1 hour twice a day. ...

battery life is expressed as “### Days”. Pressing the MODE button will return to the Camera Setup menu. NOTE: The number of days shown is based on using 8 AA alkaline batteries with 5 day and 5 night photos per day. Actual battery life will vary depending on type of battery, weather conditions and camera usage. It is recommended to use lithium batteries for best perfo ...

Page 10 ADVANCED INFORMATION VI VIEWING PICTURES ON COMPUTER VIA USB 1. Plug provided USB cable into the USB port on your Windows 7/Vista/XP computer. 2. Plug other end of USB cable into the camera's USB port. 3. To access JPG pictures and AVI movie files, navigate to "My Computer" and double click the "Moultrie CAM" drive. Picture files will be stored In the DCIM/100_MDGC directory; video files are located in the DCIM directory ...

Page 11 ADVANCED INFORMATION (cont.) VI INFORMATION ON PICTURE The info strip below will appear at the bottom of the photo/video: Temp. Moon Date Time Camera Name Moon Phase The icons for the moon phase are as follows: 75 oF 01/01/11 12:00 AM MYCAMERA ...

Page 12 Photo Quality LOW 1480 X 832 (1.3MP) MEDIUM 1848 x 1040 (3.2 MP) HIGH 2616 x 1472 (4.0 MP) ENHANCED 3248 x 1824 (6.0 MP) Video Quality HIGH 720 x 400 @ 24fps LOW 352 x 192 @ 24fps Approximate photos stored 1GB SD card LOW 3779 MEDIUM 1784 HIGH 890 ENHANCED 578 Approximate video time stored 1GB SD card HIGH 20min LOW 60min Optional SD Memory Card 32 GB Max Optical Field of View 55 degrees Batteries Alkaline AA-cells Approx ...

A INTRODUCTION In time-lapse photography a series of still photos are taken at regular time intervals. The PlotStalker Software allows you to load the time lapse file that was captured from your Moultrie Game Camera and scroll backward and forward through your photos, single step, search for activity in a designated area, and save the files. Computer: Intel® Pentium® ...

B ACTIVITY SEARCH The Search Feature will scan through your photos and automatically look for changes in regions that you identify in Setup. In search mode, the PlotStalker software scans through the .mlt photo file, stops on a photo when changes are found in your identified region, and then highlights the changes in blue. You can click anywhere in the video viewing area to remove the blue highlights ...

Use the Save File features of the PlotStalker software to create a single photo, reduce the overall size of the .mlt file, exclude unwanted photos in the front, or create a video that can be viewed using a standard media player. EXPORTING AN IMAGE/PHOTO 1 2 3 On the main screen, choose a starting image/ photo (frame) by using the scroll bar on the bottom of the display or the fr ...